-
This is a list of projects currently being worked on by Standards Australia's Standards Development Team.
Project Code
Project Title
-
Facilities for persons with disabilities for lifts
International Adoption - Modified
-
Lifts, escalators and moving walks, Part 19: Safety Rules for the construction and installation of lifts – Lifts for the transport of persons and goods - Remote Alarm on passenger and goods passenger lifts
International Adoption - Identical
-
Lifts, escalators and moving walks, Part 5.1: Construction and installation (EN 115-1:2017, MOD)
International Adoption - Modified
-
Lifts, escalators and moving walks, Part 5.2: Rules for the improvement of safety of existing escalators and moving walks (EN 115-2:2017, MOD)
International Adoption - Modified
-
Lifts, escalators and moving walks, Part 5.3: Correlation between EN115:1995 and its amendments and EN115:2008 (CEN/TR 115-3:2017, MOD)
International Adoption - Modified
-
Lifts, escalators and moving walks, Part 5.4: Interpretations related to EN 115 family of standards (CEN/TS 115-4:2015, MOD)
International Adoption - Modified
-
Energy performance of lifts, escalators and moving walks - Part 1: Energy measurement and verification
International Adoption - Identical
-
Energy performance of lifts, escalators and moving walks – Part 2: Energy calculation and classification for lifts (elevators)
International Adoption - Identical
-
Energy performance of lifts, escalators and moving walks – Part 3: Energy calculation and classification of escalators and moving walks
International Adoption - Identical
-
The constitution of a Technical Committee consists of the Nominating Organisations that represent various interest groups across the industries. These Nominating Organisations are currently participating in Standards Australia’s Standards Development activity. The Nominating Organisation appoints a representative to represent the views of that organisation’s interest group during the development of a Standard.
-
Association of Consultants in Access Australia
-
Association of Independent Lift Companies
-
Australasian Fire and Emergency Service Authorities Council
-
Australian Building Codes Board
-
Australian Chamber of Commerce and Industry
-
Australian Elevator Association
-
Australian Industry Group
-
Australian Institute of Building Surveyors
-
Communications, Electrical and Plumbing Union - Electrical Division
-
Co-opted Member
-
Engineers Australia
-
Independent Chairperson
-
Lift Engineering Society of Australia
-
Property Council of Australia
-
Safe Work Australia
-
Standards Australia participates in Standards development with the International standards bodies as listed below.
For further information on ISO relationships please visit ISO’s website www.iso.org
For further information on IEC relationships please visit IEC’s website www.iec.ch
-
Lifts, escalators and moving walks
-
Lifts, escalators and moving walks
-
Below is the list of current Standards developed and published by Standards Australia. This list does not display the obsolete, superseded, available superseded and withdrawn Standards. The published Standards are documents that set out specifications and procedures designed to ensure products, services and systems are safe, reliable and consistently perform the way they are intended to.
Purchasing Standards
To purchase a Standard, please contact our publishing partner SAI Global
InfoStore.
Designation
Publication Title
-
Lifts, escalators and moving walks, Part 1: General requirements
Provides general requirements, including definitions of terms, relevant to various Parts of the AS 1735 series.
-
Lifts, escalators and moving walks, Part 1: General requirements
Provides general requirements, including definitions of terms, relevant to various Parts of the AS 1735 series.
-
Lifts, escalators and moving walks (known as the SAA Lift Code) - Fire-rated landing doors
Sets out requirements for fire-rated landing doors for retarding the passage of fire through openings in fire-rated liftwells. It applies where doors are required to have a fire-rating certificate.
-
Lifts, escalators and moving walks (known as the SAA Lift Code) - Fire-rated landing doors
Sets out requirements for fire-rated landing doors for retarding the passage of fire through openings in fire-rated liftwells. It applies where doors are required to have a fire-rating certificate.
-
Lifts, escalators and moving walks (known as the SAA Lift Code) - Fire-rated landing doors
Sets out requirements for fire-rated landing doors for retarding the passage of fire through openings in fire-rated liftwells. It applies where doors are required to have a fire-rating certificate.
-
Lifts, escalators and moving walks - Facilities for persons with disabilities
Sets out requirements for passenger lifts which are specifically designed to assist persons with disabilities. Applies only to lifts for which a building authority having jurisdiction stipulates the provision of facilities for persons with disabilities; however, it does not apply to lifts in a private residence.
-
Lifts, escalators and moving walks - Facilities for persons with disabilities
-
AS 1735.14-1998 Rul 1:2014
Lifts, escalators and moving walks Part 14: Low rise platform for passengers
Sets out Rulings to AS 1735.14-1998, which provide interpretations to specific enquiries that have a wide area of practical application but are generally not suitable for inclusion in the Standard.
-
Lifts, escalators and moving walks - Low rise passenger lifts - Non-automatically controlled
Specifies requirements for low-speed passenger lifts controlled by a constant pressure device. It is intended that the Standard be applied only for lifts used primarily by persons with limited mobility.
-
Lifts, escalators and moving walks - Lifts for persons with limited mobility - Restricted use - Automatically controlled
Specifies requirements for automatically controlled, low-speed passenger lifts intended for infrequent use by persons with limited mobility.
-
Lifts, escalators and moving walks (known as the SAA Lift Code) - Service lifts - Power-operated
-
Lifts, escalators and moving walks (known as the SAA Lift Code) - Service lifts - Power-operated
-
Lifts, escalators and moving walks - Part 5: Escalators and moving walks
Adopts EN 115-1:2008, which sets out requirements for the construction and installation of escalators and moving walks for carrying passengers.
-
Lifts, escalators and moving walks - Stairway lifts
Specifies requirements for power-operated stairway lifts intended for use by persons with limited mobility. The lifts consist of a carriage, incorporating a platform, or a chair, or both, for raising or lowering persons along stairways.
-
Lifts, escalators and moving walks (known as the SAA Lift Code) - Inclined lifts
-
Lifts, escalators and moving walks - Special purpose industrial lifts
-
Safe working on new lift installations in new constructions
Specifies safe working provisions and practices for those responsible for, and involved in, new lift installations in new liftwells.
-
Safe working on new lift installations in new constructions
Specifies safe working provisions and practices for those responsible for, and involved in, new lift installations in new liftwells.
-
Safety requirements for lifts (elevators) - Part 1: Global essential safety requirements (GESRs)
International adoption identical
Specifies global essential safety requirements (GESRs) for lifts (elevators), their components and functions, and establishes a system and provides methods for minimizing safety risks that may arise in the course of the operation and use of, or work on, lifts (elevators).
-
Safety requirements for lifts (elevators) -- Part 2: Safety parameters meeting the global essential safety requirements (GESRs)
International adoption identical
Adopts ISO22559-2:2010 to provide safety requirements of GESRs by specifying global safety parameters (GSPs) for use where applicable.
-
Safety requirements for lifts (elevators) -- Part 3: Global conformity assessment procedures (GCAP) -- Prerequisites for certification of conformity of lift systems, lift components and lift functions
International adoption identical
Adopts ISO/TS 22559-3:2011 to specify prerequisites for application for a global conformity assessment procedure (GCPA) certificate of conformity for new lift systems, lift components or lift functions.
-
Safety requirements for escalators and moving walks -- Part 1: Global essential safety requirements (GESR)
International adoption identical
Adopts ISO/TS25740-1:2011, which specifies global essential safety requirements (GESRs) when using new technologies in the design and certifying of escalators and moving walks.
-
The Sub Committees within the Technical Committee are listed here.
-
ME-004-00 Dummy
-
ME-004-01 WHS Regulator Group
-
ME-004-05 Code of Practice
-
ME-004-07 Lift Installations (New Zealand)
-
ME-004-09 Facilities In Lifts For People With Disa
-
ME-004-10 Tests
-
ME-004-11 ISO Liaison
-
ME-004-12 Measurement of Lift Ride Quality
-
ME-004-13 Risks and hazards assessment