-
This is a list of projects currently being worked on by Standards Australia's Standards Development Team.
There are no active projects for this committee
-
The constitution of a Technical Committee consists of the Nominating Organisations that represent various interest groups across the industries. These Nominating Organisations are currently participating in Standards Australia’s Standards Development activity. The Nominating Organisation appoints a representative to represent the views of that organisation’s interest group during the development of a Standard.
Australian Forest Products Association
Australian Paint Manufacturers Federation
Australian Timber Flooring Association
Australian Timber Importers Federation Inc
CSIRO
Department of Agriculture, Fisheries and Forestry (QLD)
Fire Protection Association Australia
For Information
Forest Products Commission (WA)
Forestry Corporation of NSW
Furntech-AFRDI
Master Builders Australia
National Wood Flooring Association of Australia
NATSPEC
New Zealand Timber Industry Federation
Standards New Zealand
Tasmanian Timber Promotion Board
-
Standards Australia participates in Standards development with the International standards bodies as listed below.
For further information on ISO relationships please visit ISO’s website www.iso.org
For further information on IEC relationships please visit IEC’s website www.iec.ch
There are no international relationships for this committee
-
Below is the list of current Standards developed and published by Standards Australia. This list does not display the obsolete, superseded, available superseded and withdrawn Standards. The published Standards are documents that set out specifications and procedures designed to ensure products, services and systems are safe, reliable and consistently perform the way they are intended to.
Purchasing Standards
To purchase a Standard, please contact our publishing partner SAI Global
InfoStore.
Designation
Publication Title
-
Timber - Handles for tools
Specifies quality requirements for Grades AW and BW of hickory handles for striking tools and Grades A and B of Australian hardwood handles for both striking and non-striking tools. Appendices give recommendations for timber species, dimensions and tolerances of these tool handles.
-
Timber - Hardwood - Sawn and milled products - Grade description
Specifies grade descriptions for use with the hardwood milled products specified in AS 2796.1. These are primarily appearance products.
-
Timber - Hardwood - Sawn and milled products - Product specification
Specifies product requirements for sawn and milled hardwood products. Moisture content, profiles, tolerances and grades are covered. Requirements are also given for glued laminating, finger jointing and end-matching. Guidance is given on information to be supplied when ordering.
-
Timber - Hardwood - Sawn and milled products - Timber for furniture components
Specifies product requirements and grade descriptions for sawn and milled hardwood for use in the production of furniture. Moisture content, tolerances, glue laminating and finger jointing are covered. The grades are not intended to indicate a ranking of quality. They are primarily used with appearance products.
-
Timber - Seasoned cypress pine - Milled products
Specifies tolerance, machining grade limits and grade descriptions for tongue and groove flooring, light decking, lining, dressed boards, joinery stock and moulding, cladding, fascia boards, and barge boards milled from cypress pine and supplied seasoned. Appendices give information on requirements for finger-joining and recommendation for the installation of finishings and maintenance of cypress decking.
-
Timber - Softwood - Sawn and milled products - Grade description
Sets out the grade descriptions for use with the softwood products specified in Part 1 of this series. The grades are not intended to indicate a ranking of quality. They are primarily used for appearance products. Grade descriptions are given for pinus species and for other softwoods. Cypress species are covered in AS 1810.
-
Timber - Softwood - Sawn and milled products - Product specification
Sets out the product requirements for sawn and milled softwood timber products including type of product, dimensions, moisture content, tolerances, distortions, surface finish, finger-jointing, glue-laminating and end-matching. Grade descriptions are given in Part 2 of this series.
-
Timber - Softwood - Sawn and milled products - Timber for furniture components
Sets out the product requirements and grade descriptions for sawn and milled softwood timber for furniture components. Includes moisture content, tolerances, distortions, surface finish, finger-jointing and glue-laminating. The grades are not intended to indicate a ranking of quality. Grade descriptions are given for pinus species and for other softwoods. Cypress species are covered in AS 1810.
-
Timber flooring - Sanding and finishing
Proposes methods for the sanding and finishing of timber floors including strip flooring and parquet. Information is included for specifiers, on the problems of assessing equilibrium moisture content and on the types of coating systems available..
-
Timber - Assessment of drying quality
Sets out procedures for specifying and verifying the moisture content of seasoned solid timber. Provides a range of drying quality classes for timber dried in kilns or by other means where the result is a population of timber with a predictable scater of moisture contents. Other drying quality criteria such as checking, collapse and distortion are detailed in an appendix.
-
The Sub Committees within the Technical Committee are listed here.
TM-007-00-01 Installation, Sanding and Finishing of F
TM-007-00-03 Softwood and Hardwood
TM-007-00-04 WG5