-
This is a list of projects currently being worked on by Standards Australia's Standards Development Team.
Project Code
Project Title
-
Information technology - Generic cabling for customer premises, Part 2: Office premises (ISO/IEC 11801-2:2017, MOD)
International Adoption - Modified
-
Information technology - Generic cabling for customer premises, Part 4: Single-tenant homes (ISO/IEC 11801-4:2017, MOD)
International Adoption - Modified
-
Information technology - Generic cabling for customer premises, Part 5: Data centres (ISO/IEC 11801-5:2017, MOD)
International Adoption - Modified
-
Information technology - Generic cabling for customer premises, Part 6: Distributed building services (ISO/IEC 11801-6:2017, MOD)
International Adoption - Modified
-
Information technology—Generic cabling for customer premises, Part 1: General requirements (ISO/IEC 11801-1:2017, MOD)
International Adoption - Modified
-
Information technology - Telecommunications cabling requirements for remote powering of terminal equipment (ISO/IEC TS 29125:2017, MOD)
International Adoption - Identical
-
The constitution of a Technical Committee consists of the Nominating Organisations that represent various interest groups across the industries. These Nominating Organisations are currently participating in Standards Australia’s Standards Development activity. The Nominating Organisation appoints a representative to represent the views of that organisation’s interest group during the development of a Standard.
-
Australian Chamber of Commerce and Industry
-
Australian Communications and Media Authority
-
Australian Communications Consumer Action Network
-
Australian Council of Trade Unions
-
Australian Digital & Telecommunications Industry Association Inc
-
Australian Industry Group
-
Australian Information Industry Association
-
BICSI South Pacific (Australia)
-
BICSI South Pacific (New Zealand)
-
Communications Alliance Limited
-
Energy Networks Australia
-
Engineers Australia
-
Independent Chairperson (Australia)
-
KNX National Group
-
Lighting Council Australia
-
National Electrical and Communications Association
-
NBN Co
-
New Zealand Consulting Interests
-
New Zealand Defence Force
-
Standards New Zealand
-
Telecommunications Users Association of New Zealand
-
Telstra Corporation Limited
-
Standards Australia participates in Standards development with the International standards bodies as listed below.
For further information on ISO relationships please visit ISO’s website www.iso.org
For further information on IEC relationships please visit IEC’s website www.iec.ch
-
Interconnection of information technology equipment
-
-
Wires and symmetric cables
-
RF and microwave passive components
-
-
-
Fibre optic interconnecting devices and passive components
-
Fibre optic systems and active devices
-
Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories
-
Electrical connectors and mechanical structures for electrical and electronic equipment
-
-
Below is the list of current Standards developed and published by Standards Australia. This list does not display the obsolete, superseded, available superseded and withdrawn Standards. The published Standards are documents that set out specifications and procedures designed to ensure products, services and systems are safe, reliable and consistently perform the way they are intended to.
Purchasing Standards
To purchase a Standard, please contact our publishing partner SAI Global
InfoStore.
Designation
Publication Title
-
Telecommunication cables - Insulation, sheath and jacket, Part 1: Materials
This Standard specifies the material requirements of the finished products and some of the compounds used to manufacture telecommunication cables.
-
Telecommunication cables - Insulation, sheath and jacket, Part 1: Materials
This Standard specifies the material requirements of the finished products and some of the compounds used to manufacture telecommunication cables.
-
Telecommunication cables - Insulation, sheath and jacket, Part 1: Materials
This Standard specifies the material requirements of the finished products and some of the compounds used to manufacture telecommunication cables.
-
Telecommunication cables - Insulation, sheath and jacket, Part 1: Materials
This Standard specifies the material requirements of the finished products and some of the compounds used to manufacture telecommunication cables.
-
Telecommunication cables - Insulation, sheath and jacket, Part 1: Materials
This Standard specifies the material requirements of the finished products and some of the compounds used to manufacture telecommunication cables.
-
Telecommunication cables - Insulation, sheath and jacket, Part 1: Materials
This Standard specifies the material requirements of the finished products and some of the compounds used to manufacture telecommunication cables.
-
AS 1049.1:2014 Amd 1:2019
Telecommunication cables - Insulation, sheath and jacket, Part 1: Materials
This Standard specifies the material requirements of the finished products and some of the compounds used to manufacture telecommunication cables.
-
AS 1049.1:2014 Amd 1:2019
Telecommunication cables - Insulation, sheath and jacket, Part 1: Materials
This Standard specifies the material requirements of the finished products and some of the compounds used to manufacture telecommunication cables.
-
AS 1049.1:2014 Amd 1:2019
Telecommunication cables - Insulation, sheath and jacket, Part 1: Materials
This Standard specifies the material requirements of the finished products and some of the compounds used to manufacture telecommunication cables.
-
AS 1049.1:2014 Amd 1:2019
Telecommunication cables - Insulation, sheath and jacket, Part 1: Materials
This Standard specifies the material requirements of the finished products and some of the compounds used to manufacture telecommunication cables.
-
AS 1049.1:2014 Amd 1:2019
Telecommunication cables - Insulation, sheath and jacket, Part 1: Materials
This Standard specifies the material requirements of the finished products and some of the compounds used to manufacture telecommunication cables.
-
AS 1049.1:2014 Amd 1:2019
Telecommunication cables - Insulation, sheath and jacket, Part 1: Materials
This Standard specifies the material requirements of the finished products and some of the compounds used to manufacture telecommunication cables.
-
Telecommunication cables - Insulation, sheath and jacket-Test methods
-
Telecommunication cables - Insulation, sheath and jacket-Test methods
-
Telecommunication cables - Insulation, sheath and jacket-Test methods
-
Telecommunication cables - Insulation, sheath and jacket-Test methods
-
Information technology - Generic cabling for customer premises, Part 2: Office premises (ISO/IEC 11801-2:2017, MOD)
International adoption modified
The objective of this Standard is to specify generic cabling for use within office premises, which can comprise single or multiple buildings on a campus. It covers balanced cabling and optical fibre cabling.
-
Information technology - Generic cabling for customer premises, Part 2: Office premises (ISO/IEC 11801-2:2017, MOD)
International adoption modified
The objective of this Standard is to specify generic cabling for use within office premises, which can comprise single or multiple buildings on a campus. It covers balanced cabling and optical fibre cabling.
-
Information technology - Generic cabling for customer premises, Part 2: Office premises (ISO/IEC 11801-2:2017, MOD)
International adoption modified
The objective of this Standard is to specify generic cabling for use within office premises, which can comprise single or multiple buildings on a campus. It covers balanced cabling and optical fibre cabling.
-
Information technology - Generic cabling for customer premises, Part 2: Office premises (ISO/IEC 11801-2:2017, MOD)
International adoption modified
The objective of this Standard is to specify generic cabling for use within office premises, which can comprise single or multiple buildings on a campus. It covers balanced cabling and optical fibre cabling.
-
Information technology - Generic cabling for customer premises, Part 2: Office premises (ISO/IEC 11801-2:2017, MOD)
International adoption modified
The objective of this Standard is to specify generic cabling for use within office premises, which can comprise single or multiple buildings on a campus. It covers balanced cabling and optical fibre cabling.
-
Information technology - Generic cabling for customer premises, Part 2: Office premises (ISO/IEC 11801-2:2017, MOD)
International adoption modified
The objective of this Standard is to specify generic cabling for use within office premises, which can comprise single or multiple buildings on a campus. It covers balanced cabling and optical fibre cabling.
-
Information technology - Generic cabling for customer premises, Part 3: Industrial premises (ISO/IEC 11801-3:2017, MOD)
International adoption modified
The objective of this Standard specifies generic cabling for use within industrial premises, or industrial areas within other types of premises, which can comprise single or multiple buildings on a campus. It covers balanced cabling and optical fibre cabling.
-
Information technology - Generic cabling for customer premises, Part 3: Industrial premises (ISO/IEC 11801-3:2017, MOD)
International adoption modified
The objective of this Standard specifies generic cabling for use within industrial premises, or industrial areas within other types of premises, which can comprise single or multiple buildings on a campus. It covers balanced cabling and optical fibre cabling.
-
Information technology - Generic cabling for customer premises, Part 3: Industrial premises (ISO/IEC 11801-3:2017, MOD)
International adoption modified
The objective of this Standard specifies generic cabling for use within industrial premises, or industrial areas within other types of premises, which can comprise single or multiple buildings on a campus. It covers balanced cabling and optical fibre cabling.
-
Information technology - Generic cabling for customer premises, Part 3: Industrial premises (ISO/IEC 11801-3:2017, MOD)
International adoption modified
The objective of this Standard specifies generic cabling for use within industrial premises, or industrial areas within other types of premises, which can comprise single or multiple buildings on a campus. It covers balanced cabling and optical fibre cabling.
-
Information technology - Generic cabling for customer premises, Part 3: Industrial premises (ISO/IEC 11801-3:2017, MOD)
International adoption modified
The objective of this Standard specifies generic cabling for use within industrial premises, or industrial areas within other types of premises, which can comprise single or multiple buildings on a campus. It covers balanced cabling and optical fibre cabling.
-
Information technology - Generic cabling for customer premises, Part 3: Industrial premises (ISO/IEC 11801-3:2017, MOD)
International adoption modified
The objective of this Standard specifies generic cabling for use within industrial premises, or industrial areas within other types of premises, which can comprise single or multiple buildings on a campus. It covers balanced cabling and optical fibre cabling.
-
Information technology - Generic cabling for customer premises, Part 3: Industrial premises (ISO/IEC 11801-3:2017, MOD)
International adoption modified
The objective of this Standard specifies generic cabling for use within industrial premises, or industrial areas within other types of premises, which can comprise single or multiple buildings on a campus. It covers balanced cabling and optical fibre cabling.
-
Information technology - Generic cabling for customer premises, Part 3: Industrial premises (ISO/IEC 11801-3:2017, MOD)
International adoption modified
The objective of this Standard specifies generic cabling for use within industrial premises, or industrial areas within other types of premises, which can comprise single or multiple buildings on a campus. It covers balanced cabling and optical fibre cabling.
-
Information technology - Generic cabling for customer premises, Part 3: Industrial premises (ISO/IEC 11801-3:2017, MOD)
International adoption modified
The objective of this Standard specifies generic cabling for use within industrial premises, or industrial areas within other types of premises, which can comprise single or multiple buildings on a campus. It covers balanced cabling and optical fibre cabling.
-
Information technology - Generic cabling for customer premises, Part 4: Single-tenant homes (ISO/IEC 11801-4:2017, MOD)
International adoption modified
The objective of this Standard is to specify generic cabling for single-tenant homes. A home can contain one or more buildings or can be within a building that contains more than one home. It covers balanced cabling, optical fibre cabling and coaxial cabling.
-
Information technology - Generic cabling for customer premises, Part 4: Single-tenant homes (ISO/IEC 11801-4:2017, MOD)
International adoption modified
The objective of this Standard is to specify generic cabling for single-tenant homes. A home can contain one or more buildings or can be within a building that contains more than one home. It covers balanced cabling, optical fibre cabling and coaxial cabling.
-
Information technology - Generic cabling for customer premises, Part 4: Single-tenant homes (ISO/IEC 11801-4:2017, MOD)
International adoption modified
The objective of this Standard is to specify generic cabling for single-tenant homes. A home can contain one or more buildings or can be within a building that contains more than one home. It covers balanced cabling, optical fibre cabling and coaxial cabling.
-
Information technology - Generic cabling for customer premises, Part 4: Single-tenant homes (ISO/IEC 11801-4:2017, MOD)
International adoption modified
The objective of this Standard is to specify generic cabling for single-tenant homes. A home can contain one or more buildings or can be within a building that contains more than one home. It covers balanced cabling, optical fibre cabling and coaxial cabling.
-
Information technology - Generic cabling for customer premises, Part 4: Single-tenant homes (ISO/IEC 11801-4:2017, MOD)
International adoption modified
The objective of this Standard is to specify generic cabling for single-tenant homes. A home can contain one or more buildings or can be within a building that contains more than one home. It covers balanced cabling, optical fibre cabling and coaxial cabling.
-
Information technology - Generic cabling for customer premises, Part 4: Single-tenant homes (ISO/IEC 11801-4:2017, MOD)
International adoption modified
The objective of this Standard is to specify generic cabling for single-tenant homes. A home can contain one or more buildings or can be within a building that contains more than one home. It covers balanced cabling, optical fibre cabling and coaxial cabling.
-
Information technology - Generic cabling for customer premises, Part 4: Single-tenant homes (ISO/IEC 11801-4:2017, MOD)
International adoption modified
The objective of this Standard is to specify generic cabling for single-tenant homes. A home can contain one or more buildings or can be within a building that contains more than one home. It covers balanced cabling, optical fibre cabling and coaxial cabling.
-
Information technology - Generic cabling for customer premises, Part 5: Data centres (ISO/IEC 11801-5:2017, MOD)
International adoption modified
The objective of this Standard is to specify generic cabling within and to the computer room spaces of data centre premises, or data centre spaces within other types of buildings. It covers balanced cabling and optical fibre cabling.
-
Information technology - Generic cabling for customer premises, Part 5: Data centres (ISO/IEC 11801-5:2017, MOD)
International adoption modified
The objective of this Standard is to specify generic cabling within and to the computer room spaces of data centre premises, or data centre spaces within other types of buildings. It covers balanced cabling and optical fibre cabling.
-
Information technology - Generic cabling for customer premises, Part 5: Data centres (ISO/IEC 11801-5:2017, MOD)
International adoption modified
The objective of this Standard is to specify generic cabling within and to the computer room spaces of data centre premises, or data centre spaces within other types of buildings. It covers balanced cabling and optical fibre cabling.
-
Information technology - Generic cabling for customer premises, Part 5: Data centres (ISO/IEC 11801-5:2017, MOD)
International adoption modified
The objective of this Standard is to specify generic cabling within and to the computer room spaces of data centre premises, or data centre spaces within other types of buildings. It covers balanced cabling and optical fibre cabling.
-
Information technology - Generic cabling for customer premises, Part 5: Data centres (ISO/IEC 11801-5:2017, MOD)
International adoption modified
The objective of this Standard is to specify generic cabling within and to the computer room spaces of data centre premises, or data centre spaces within other types of buildings. It covers balanced cabling and optical fibre cabling.
-
Information technology - Generic cabling for customer premises, Part 5: Data centres (ISO/IEC 11801-5:2017, MOD)
International adoption modified
The objective of this Standard is to specify generic cabling within and to the computer room spaces of data centre premises, or data centre spaces within other types of buildings. It covers balanced cabling and optical fibre cabling.
-
Information technology - Generic cabling for customer premises, Part 6: Distributed building services (ISO/IEC 11801-6:2017, MOD)
International adoption modified
The objective of this Standard specifies generic cabling within premises that comprise single or multiple buildings on a campus. It covers balanced cabling and optical fibre cabling.
-
Information technology - Generic cabling for customer premises, Part 6: Distributed building services (ISO/IEC 11801-6:2017, MOD)
International adoption modified
The objective of this Standard specifies generic cabling within premises that comprise single or multiple buildings on a campus. It covers balanced cabling and optical fibre cabling.
-
Information technology - Generic cabling for customer premises, Part 6: Distributed building services (ISO/IEC 11801-6:2017, MOD)
International adoption modified
The objective of this Standard specifies generic cabling within premises that comprise single or multiple buildings on a campus. It covers balanced cabling and optical fibre cabling.
-
Information technology - Generic cabling for customer premises, Part 6: Distributed building services (ISO/IEC 11801-6:2017, MOD)
International adoption modified
The objective of this Standard specifies generic cabling within premises that comprise single or multiple buildings on a campus. It covers balanced cabling and optical fibre cabling.
-
Information technology - Generic cabling for customer premises, Part 6: Distributed building services (ISO/IEC 11801-6:2017, MOD)
International adoption modified
The objective of this Standard specifies generic cabling within premises that comprise single or multiple buildings on a campus. It covers balanced cabling and optical fibre cabling.
-
Information technology - Generic cabling for customer premises, Part 6: Distributed building services (ISO/IEC 11801-6:2017, MOD)
International adoption modified
The objective of this Standard specifies generic cabling within premises that comprise single or multiple buildings on a campus. It covers balanced cabling and optical fibre cabling.
-
Information technology - Telecommunications bonding networks for buildings and other structures
International adoption modified
The objective of this Standard is to specify the requirements and recommendations for the design and installation of connections (bonds) between various electrically conductive elements in buildings and other structures, during their construction or refurbishment, in which information technology (IT) and, more generally, telecommunications equipment is intended to be installed in order to - (a) minimize the risk to the correct function of that equipment and interconnecting cabling to the electrical earth system; and (b) provide the telecommunications installation with a reliable signal reference, which may improve immunity from electromagnetic interference (EMI).
-
Information technology - Telecommunications bonding networks for buildings and other structures
International adoption modified
The objective of this Standard is to specify the requirements and recommendations for the design and installation of connections (bonds) between various electrically conductive elements in buildings and other structures, during their construction or refurbishment, in which information technology (IT) and, more generally, telecommunications equipment is intended to be installed in order to - (a) minimize the risk to the correct function of that equipment and interconnecting cabling to the electrical earth system; and (b) provide the telecommunications installation with a reliable signal reference, which may improve immunity from electromagnetic interference (EMI).
-
Information technology - Telecommunications bonding networks for buildings and other structures
International adoption modified
The objective of this Standard is to specify the requirements and recommendations for the design and installation of connections (bonds) between various electrically conductive elements in buildings and other structures, during their construction or refurbishment, in which information technology (IT) and, more generally, telecommunications equipment is intended to be installed in order to - (a) minimize the risk to the correct function of that equipment and interconnecting cabling to the electrical earth system; and (b) provide the telecommunications installation with a reliable signal reference, which may improve immunity from electromagnetic interference (EMI).
-
AS/CA S008:2010 Amdt 1:2014
Requirements for Customer Cabling Products
-
Information technology - Generic cabling for customer premises, Part 1: General requirements (ISO/IEC 11801-1:2017, MOD)
International adoption modified
The objective of this Standard specifies requirements that are common to the other parts of the AS/NZS 11801 series or ISO/IEC 11801 series. Cabling specified by this Standard supports a wide range of services including voice, data, and video that may also incorporate the supply of power.
-
Information technology - Generic cabling for customer premises, Part 1: General requirements (ISO/IEC 11801-1:2017, MOD)
International adoption modified
The objective of this Standard specifies requirements that are common to the other parts of the AS/NZS 11801 series or ISO/IEC 11801 series. Cabling specified by this Standard supports a wide range of services including voice, data, and video that may also incorporate the supply of power.
-
Information technology - Generic cabling for customer premises, Part 1: General requirements (ISO/IEC 11801-1:2017, MOD)
International adoption modified
The objective of this Standard specifies requirements that are common to the other parts of the AS/NZS 11801 series or ISO/IEC 11801 series. Cabling specified by this Standard supports a wide range of services including voice, data, and video that may also incorporate the supply of power.
-
Information technology - Generic cabling for customer premises, Part 1: General requirements (ISO/IEC 11801-1:2017, MOD)
International adoption modified
The objective of this Standard specifies requirements that are common to the other parts of the AS/NZS 11801 series or ISO/IEC 11801 series. Cabling specified by this Standard supports a wide range of services including voice, data, and video that may also incorporate the supply of power.
-
Information technology - Generic cabling for customer premises, Part 1: General requirements (ISO/IEC 11801-1:2017, MOD)
International adoption modified
The objective of this Standard specifies requirements that are common to the other parts of the AS/NZS 11801 series or ISO/IEC 11801 series. Cabling specified by this Standard supports a wide range of services including voice, data, and video that may also incorporate the supply of power.
-
Information technology - Generic cabling for customer premises, Part 1: General requirements (ISO/IEC 11801-1:2017, MOD)
International adoption modified
The objective of this Standard specifies requirements that are common to the other parts of the AS/NZS 11801 series or ISO/IEC 11801 series. Cabling specified by this Standard supports a wide range of services including voice, data, and video that may also incorporate the supply of power.
-
Information technology - Generic cabling for customer premises, Part 1: General requirements (ISO/IEC 11801-1:2017, MOD)
International adoption modified
The objective of this Standard specifies requirements that are common to the other parts of the AS/NZS 11801 series or ISO/IEC 11801 series. Cabling specified by this Standard supports a wide range of services including voice, data, and video that may also incorporate the supply of power.
-
Information technology - Generic cabling for customer premises, Part 1: General requirements (ISO/IEC 11801-1:2017, MOD)
International adoption modified
The objective of this Standard specifies requirements that are common to the other parts of the AS/NZS 11801 series or ISO/IEC 11801 series. Cabling specified by this Standard supports a wide range of services including voice, data, and video that may also incorporate the supply of power.
-
Information technology - Generic cabling for customer premises, Part 1: General requirements (ISO/IEC 11801-1:2017, MOD)
International adoption modified
The objective of this Standard specifies requirements that are common to the other parts of the AS/NZS 11801 series or ISO/IEC 11801 series. Cabling specified by this Standard supports a wide range of services including voice, data, and video that may also incorporate the supply of power.
-
Information technology - Generic cabling for customer premises, Part 1: General requirements (ISO/IEC 11801-1:2017, MOD)
International adoption modified
The objective of this Standard specifies requirements that are common to the other parts of the AS/NZS 11801 series or ISO/IEC 11801 series. Cabling specified by this Standard supports a wide range of services including voice, data, and video that may also incorporate the supply of power.
-
Information technology - Generic cabling for customer premises, Part 1: General requirements (ISO/IEC 11801-1:2017, MOD)
International adoption modified
The objective of this Standard specifies requirements that are common to the other parts of the AS/NZS 11801 series or ISO/IEC 11801 series. Cabling specified by this Standard supports a wide range of services including voice, data, and video that may also incorporate the supply of power.
-
Information technology -- Implementation and operation of customer premises cabling, Part 3: Testing of optical fibre cabling
International adoption modified
Adopts ISO/IEC14763-3:2014 to specify systems and methods for the inspection and testing of installed optical fibre cabling designed in accordance with premises cabling standards including ISO/IEC11801, ISO/IEC24764, ISO/IEC24702 and ISO/IEC15018.
-
Information technology -- Implementation and operation of customer premises cabling, Part 3: Testing of optical fibre cabling
International adoption modified
Adopts ISO/IEC14763-3:2014 to specify systems and methods for the inspection and testing of installed optical fibre cabling designed in accordance with premises cabling standards including ISO/IEC11801, ISO/IEC24764, ISO/IEC24702 and ISO/IEC15018.
-
Information technology -- Implementation and operation of customer premises cabling, Part 3: Testing of optical fibre cabling
International adoption modified
Adopts ISO/IEC14763-3:2014 to specify systems and methods for the inspection and testing of installed optical fibre cabling designed in accordance with premises cabling standards including ISO/IEC11801, ISO/IEC24764, ISO/IEC24702 and ISO/IEC15018.
-
Information technology -- Implementation and operation of customer premises cabling, Part 3: Testing of optical fibre cabling
International adoption modified
Adopts ISO/IEC14763-3:2014 to specify systems and methods for the inspection and testing of installed optical fibre cabling designed in accordance with premises cabling standards including ISO/IEC11801, ISO/IEC24764, ISO/IEC24702 and ISO/IEC15018.
-
AS/NZS 14763.3:2017 Amd 1:2018
Information technology - Implementation and operation of customer premises cabling, Part 3: Testing of optical fibre cabling (ISO/IEC 14763-3:2014, MOD)
-
AS/NZS 14763.3:2017 Amd 1:2018
Information technology - Implementation and operation of customer premises cabling, Part 3: Testing of optical fibre cabling (ISO/IEC 14763-3:2014, MOD)
-
AS/NZS 14763.3:2017 Amd 1:2018
Information technology - Implementation and operation of customer premises cabling, Part 3: Testing of optical fibre cabling (ISO/IEC 14763-3:2014, MOD)
-
AS/NZS 14763.3:2017 Amd 1:2018
Information technology - Implementation and operation of customer premises cabling, Part 3: Testing of optical fibre cabling (ISO/IEC 14763-3:2014, MOD)
-
AS/NZS 14763.3:2017 Amd 1:2018
Information technology - Implementation and operation of customer premises cabling, Part 3: Testing of optical fibre cabling (ISO/IEC 14763-3:2014, MOD)
-
AS/NZS 14763.3:2017 Amd 1:2018
Information technology - Implementation and operation of customer premises cabling, Part 3: Testing of optical fibre cabling (ISO/IEC 14763-3:2014, MOD)
-
AS/NZS 14763.3:2017 Amd 1:2018
Information technology - Implementation and operation of customer premises cabling, Part 3: Testing of optical fibre cabling (ISO/IEC 14763-3:2014, MOD)
-
AS/NZS 14763.3:2017 Amd 1:2018
Information technology - Implementation and operation of customer premises cabling, Part 3: Testing of optical fibre cabling (ISO/IEC 14763-3:2014, MOD)
-
AS/NZS 14763.3:2017 Amd 1:2018
Information technology - Implementation and operation of customer premises cabling, Part 3: Testing of optical fibre cabling (ISO/IEC 14763-3:2014, MOD)
-
Optical fibre communication cabling systems safety
This Standard provides safety rules for optical fibre communication systems and associated materials and equipment.
-
Optical fibre communication cabling systems safety
This Standard provides safety rules for optical fibre communication systems and associated materials and equipment.
-
Telecommunications installations - Generic cabling for commercial premises (ISO/IEC 11801:2002, MOD)
-
Telecommunications installations - Telecommunications pathways and spaces for commercial buildings
This Standard provides specific guidance to architects, planners, designers, engineers, builders, installers, maintenance personnel, building owners, managers and users in the planning and installation of physical pathways and spaces in and between buildings to accommodate the equipment and cabling infrastructure necessary for communications; to the extent that this is not adequately covered for Australian and New Zealand purposes in AS/NZSISO/IEC 14763.2:2014.
-
Telecommunications installations - Telecommunications pathways and spaces for commercial buildings
This Standard provides specific guidance to architects, planners, designers, engineers, builders, installers, maintenance personnel, building owners, managers and users in the planning and installation of physical pathways and spaces in and between buildings to accommodate the equipment and cabling infrastructure necessary for communications; to the extent that this is not adequately covered for Australian and New Zealand purposes in AS/NZSISO/IEC 14763.2:2014.
-
AS/NZS 3085.1:2004 Rec:2016
Telecommunications installations - Administration of communications cabling systems - Part 1: Basic requirements
-
Telecommunications installations - Administration of communications cabling systems - Basic requirements
Provides building owners and managers, and those who are required to meet cabling requirements (e.g. installers), with a set of basic specifications for identification and recording of components at the time of installation to aid in administration of application, maintenance and reconfiguration (if necessary) of telecommunications cabling infrastructure.
-
Telecommunications installations - Administration of communications cabling systems - Basic requirements
Provides building owners and managers, and those who are required to meet cabling requirements (e.g. installers), with a set of basic specifications for identification and recording of components at the time of installation to aid in administration of application, maintenance and reconfiguration (if necessary) of telecommunications cabling infrastructure.
-
AS/NZS ISO/IEC 14763.2:2014
Information technology - Implementation and operation of customer premises cabling - Planning and installation
International adoption identical
Adopts ISO/IEC 14763-2:2012 to specify requirements for the planning, installation and operation of cabling and cabling infrastructures (including cabling, pathways, spaces, earthing and bonding) in support of generic cabling standards and associated documents.
-
AS/NZS ISO/IEC 14763.2:2014
Information technology - Implementation and operation of customer premises cabling - Planning and installation
International adoption identical
Adopts ISO/IEC 14763-2:2012 to specify requirements for the planning, installation and operation of cabling and cabling infrastructures (including cabling, pathways, spaces, earthing and bonding) in support of generic cabling standards and associated documents.
-
SA TR ISO/IEC 11801.9902:2018
Information technology - Generic cabling for customer premises, Part 9902: Specifications for End-to-end link configurations
International adoption identical
The objective of this Technical Report is to provide definitions for, and examples of, cabling implementations described as end-to-end (E2E) links.
-
SA TR ISO/IEC 11801.9902:2018
Information technology - Generic cabling for customer premises, Part 9902: Specifications for End-to-end link configurations
International adoption identical
The objective of this Technical Report is to provide definitions for, and examples of, cabling implementations described as end-to-end (E2E) links.
-
SA TR ISO/IEC 11801.9902:2018
Information technology - Generic cabling for customer premises, Part 9902: Specifications for End-to-end link configurations
International adoption identical
The objective of this Technical Report is to provide definitions for, and examples of, cabling implementations described as end-to-end (E2E) links.
-
Information technology - Telecommunications cabling requirements for remote powering of terminal equipment (ISO/IEC TS 29125:2017, MOD)
International adoption identical
The objective of this Technical Specification is to address the support of safety extra low voltage and limited power source applications that provide remote power over balanced cabling in accordance with the reference implementations of AS/NZS ISO/IEC 11801 series standards using currents per conductor of up to 500 mA and target the support of applications that provide remote power over balanced cabling to terminal equipment; cover the transmission and electrical parameters needed to support remote power over balanced cabling; cover various installation scenarios and how these may impact the capability of balanced cabling to support remote powering; and specify design and configuration of cabling as specified in AS/NZS ISO/IEC 11801‑1.
-
Information technology - Telecommunications cabling requirements for remote powering of terminal equipment (ISO/IEC TS 29125:2017, MOD)
International adoption identical
The objective of this Technical Specification is to address the support of safety extra low voltage and limited power source applications that provide remote power over balanced cabling in accordance with the reference implementations of AS/NZS ISO/IEC 11801 series standards using currents per conductor of up to 500 mA and target the support of applications that provide remote power over balanced cabling to terminal equipment; cover the transmission and electrical parameters needed to support remote power over balanced cabling; cover various installation scenarios and how these may impact the capability of balanced cabling to support remote powering; and specify design and configuration of cabling as specified in AS/NZS ISO/IEC 11801‑1.
-
Information technology - Telecommunications cabling requirements for remote powering of terminal equipment (ISO/IEC TS 29125:2017, MOD)
International adoption identical
The objective of this Technical Specification is to address the support of safety extra low voltage and limited power source applications that provide remote power over balanced cabling in accordance with the reference implementations of AS/NZS ISO/IEC 11801 series standards using currents per conductor of up to 500 mA and target the support of applications that provide remote power over balanced cabling to terminal equipment; cover the transmission and electrical parameters needed to support remote power over balanced cabling; cover various installation scenarios and how these may impact the capability of balanced cabling to support remote powering; and specify design and configuration of cabling as specified in AS/NZS ISO/IEC 11801‑1.
-
Information technology - Telecommunications cabling requirements for remote powering of terminal equipment (ISO/IEC TS 29125:2017, MOD)
International adoption identical
The objective of this Technical Specification is to address the support of safety extra low voltage and limited power source applications that provide remote power over balanced cabling in accordance with the reference implementations of AS/NZS ISO/IEC 11801 series standards using currents per conductor of up to 500 mA and target the support of applications that provide remote power over balanced cabling to terminal equipment; cover the transmission and electrical parameters needed to support remote power over balanced cabling; cover various installation scenarios and how these may impact the capability of balanced cabling to support remote powering; and specify design and configuration of cabling as specified in AS/NZS ISO/IEC 11801‑1.
-
Information technology - Telecommunications cabling requirements for remote powering of terminal equipment (ISO/IEC TS 29125:2017, MOD)
International adoption identical
The objective of this Technical Specification is to address the support of safety extra low voltage and limited power source applications that provide remote power over balanced cabling in accordance with the reference implementations of AS/NZS ISO/IEC 11801 series standards using currents per conductor of up to 500 mA and target the support of applications that provide remote power over balanced cabling to terminal equipment; cover the transmission and electrical parameters needed to support remote power over balanced cabling; cover various installation scenarios and how these may impact the capability of balanced cabling to support remote powering; and specify design and configuration of cabling as specified in AS/NZS ISO/IEC 11801‑1.
-
Information technology - Telecommunications cabling requirements for remote powering of terminal equipment (ISO/IEC TS 29125:2017, MOD)
International adoption identical
The objective of this Technical Specification is to address the support of safety extra low voltage and limited power source applications that provide remote power over balanced cabling in accordance with the reference implementations of AS/NZS ISO/IEC 11801 series standards using currents per conductor of up to 500 mA and target the support of applications that provide remote power over balanced cabling to terminal equipment; cover the transmission and electrical parameters needed to support remote power over balanced cabling; cover various installation scenarios and how these may impact the capability of balanced cabling to support remote powering; and specify design and configuration of cabling as specified in AS/NZS ISO/IEC 11801‑1.
-
Information technology - Telecommunications cabling requirements for remote powering of terminal equipment (ISO/IEC TS 29125:2017, MOD)
International adoption identical
The objective of this Technical Specification is to address the support of safety extra low voltage and limited power source applications that provide remote power over balanced cabling in accordance with the reference implementations of AS/NZS ISO/IEC 11801 series standards using currents per conductor of up to 500 mA and target the support of applications that provide remote power over balanced cabling to terminal equipment; cover the transmission and electrical parameters needed to support remote power over balanced cabling; cover various installation scenarios and how these may impact the capability of balanced cabling to support remote powering; and specify design and configuration of cabling as specified in AS/NZS ISO/IEC 11801‑1.
-
Communications cabling manual - Module 3: Residential communications cabling handbook
This Handbook provides guidance on the application of communications cabling standards such as AS/NZSÂ ISO/IECÂ 15018 to residential communications cabling.
-
Communications cabling manual - Module 3: Residential communications cabling handbook
This Handbook provides guidance on the application of communications cabling standards such as AS/NZSÂ ISO/IECÂ 15018 to residential communications cabling.
-
SA/SNZ TS ISO/IEC 14543.3.1:2018
Information technology - Home electronic system (HES) architecture, Part 3.1: Communication layers - Application layer for network based control of HES Class 1
International adoption identical
The objective of this Technical Specification is to provide building owners, managers, architects, designers, manufacturers, installers, maintainers and users, with requirements for the services and protocol of the application layer to ensure compatibility and interoperability of equipment for home electronic systems.
-
SA/SNZ TS ISO/IEC 14543.3.1:2018
Information technology - Home electronic system (HES) architecture, Part 3.1: Communication layers - Application layer for network based control of HES Class 1
International adoption identical
The objective of this Technical Specification is to provide building owners, managers, architects, designers, manufacturers, installers, maintainers and users, with requirements for the services and protocol of the application layer to ensure compatibility and interoperability of equipment for home electronic systems.
-
SA/SNZ TS ISO/IEC 14543.3.2:2018
Information technology - Home electronic system (HES) architecture, Part 3.2: Communication layers – Transport, network and general parts of data link layer for network based control of HES Class 1
International adoption identical
The objective of this Technical Specification is to provide building owners, managers, architects, designers, manufacturers, installers, maintainers and users, with media independent requirements for the data link layer and the requirements of the network layer and transport layer to ensure compatibility and interoperability of equipment, for home electronic systems.
-
SA/SNZ TS ISO/IEC 14543.3.2:2018
Information technology - Home electronic system (HES) architecture, Part 3.2: Communication layers – Transport, network and general parts of data link layer for network based control of HES Class 1
International adoption identical
The objective of this Technical Specification is to provide building owners, managers, architects, designers, manufacturers, installers, maintainers and users, with media independent requirements for the data link layer and the requirements of the network layer and transport layer to ensure compatibility and interoperability of equipment, for home electronic systems.
-
SA/SNZ TS ISO/IEC 14543.3.3:2018
Information technology - Home electronic system (HES) architecture, Part 3.3: User process for network based control of HES Class 1
International adoption identical
The objective of this Technical Specification is to provide building owners, managers, architects, designers, manufacturers, installers, maintainers and users, with the requirements for the structure and functioning of servers for the objects which form part of the interface between the application layer and the application and management, to ensure compatibility and interoperability of equipment, for home electronic systems.
-
SA/SNZ TS ISO/IEC 14543.3.3:2018
Information technology - Home electronic system (HES) architecture, Part 3.3: User process for network based control of HES Class 1
International adoption identical
The objective of this Technical Specification is to provide building owners, managers, architects, designers, manufacturers, installers, maintainers and users, with the requirements for the structure and functioning of servers for the objects which form part of the interface between the application layer and the application and management, to ensure compatibility and interoperability of equipment, for home electronic systems.
-
SA/SNZ TS ISO/IEC 14543.3.4:2018
Information technology - Home electronic system (HES) architecture, Part 3.4: System management - Management procedures for network based control of HES Class 1
International adoption identical
The objective of this Technical Specification is to provide building owners, managers, architects, designers, manufacturers, installers, maintainers and users, with the general principles for network and device management shared by all installation modes, to ensure compatibility and interoperability of equipment, for home electronic systems.
-
SA/SNZ TS ISO/IEC 14543.3.4:2018
Information technology - Home electronic system (HES) architecture, Part 3.4: System management - Management procedures for network based control of HES Class 1
International adoption identical
The objective of this Technical Specification is to provide building owners, managers, architects, designers, manufacturers, installers, maintainers and users, with the general principles for network and device management shared by all installation modes, to ensure compatibility and interoperability of equipment, for home electronic systems.
-
SA/SNZ TS ISO/IEC 14543.3.5:2018
Information technology - Home electronic system (HES) architecture, Part 3.5: Media and media dependent layers - Powerline for network based control of HES Class 1
International adoption identical
The objective of this Technical Specification is to provide building owners, managers, architects, designers, manufacturers, installers, maintainers and users, with the requirements for the interconnection of entities used for home and building control via the medium powerline, to ensure compatibility and interoperability of equipment, for home electronic systems.
-
SA/SNZ TS ISO/IEC 14543.3.5:2018
Information technology - Home electronic system (HES) architecture, Part 3.5: Media and media dependent layers - Powerline for network based control of HES Class 1
International adoption identical
The objective of this Technical Specification is to provide building owners, managers, architects, designers, manufacturers, installers, maintainers and users, with the requirements for the interconnection of entities used for home and building control via the medium powerline, to ensure compatibility and interoperability of equipment, for home electronic systems.
-
SA/SNZ TS ISO/IEC 14543.3.6:2018
Information technology - Home electronic system (HES) architecture, Part 3.6: Media and media dependent layers - Twisted pair for network based control of HES Class 1
International adoption identical
The objective of this Technical Specification is to provide building owners, managers, architects, designers, manufacturers, installers, maintainers and users, with the requirements for the interconnection of entities used for home and building control via the medium powerline, to ensure compatibility and interoperability of equipment, for home electronic systems.
-
SA/SNZ TS ISO/IEC 14543.3.6:2018
Information technology - Home electronic system (HES) architecture, Part 3.6: Media and media dependent layers - Twisted pair for network based control of HES Class 1
International adoption identical
The objective of this Technical Specification is to provide building owners, managers, architects, designers, manufacturers, installers, maintainers and users, with the requirements for the interconnection of entities used for home and building control via the medium powerline, to ensure compatibility and interoperability of equipment, for home electronic systems.
-
The Sub Committees within the Technical Committee are listed here.
-
CT-001-00 Dummy
-
CT-001-02 Fibre Optics
-
CT-001-03 Materials for Telecommunication Cable
-
CT-001-63 Amendments to ISO/IEC 11801
-
CT-001-64 Earthing and Bonding
-
CT-001-65 Review subcommittee of AS/NZS 3084
-
CT-001-66 Mirror JTC1/SC 25/WG 1
-
CT-001-67 ISO/IEC JTC 1/SC 25/WG 4 Ballot Review
-
CT-001-68 Planning & Installation
-
CT-001-69 Revision of AS/N 3085.1