The committee's charter is defined in its Terms Of Reference [PDF].
Terms of Reference is subject to change

Active Projects0
Constitution0
International Relationships0
Published Standards0
Sub Committees0
Active Projects 6
Constitution 15
International Relationships 4
Published Standards 130
Sub Committees 8
  • This is a list of projects currently being worked on by Standards Australia's Standards Development Team.

    Project Code
    Project Title
    • AS/NZS 1660.5.1

      Test methods for electric cables, cords and conductors - Fire tests - Test for vertical flame spread of vertically-mounted bunched wires or cables

    • AS/NZS 1660.5.2

      Test methods for electric cables, cords and conductors - Fire tests - Measurement of smoke density of cables burning under defined conditions

    • AS/NZS 1660.5.3

      Test methods for electric cables, cords and conductors - Fire Tests - Determination of the amount of halogen acid gas evolved during the combustion of polymeric materials taken from cables

    • AS/NZS 1660.5.4

      Test methods for electric cables, cords and conductors - Fire tests - Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity

    • AS/NZS 1660.5.5

      Test methods for electric cables, cords and conductors - Fire tests - Circuit integrity

    • AS/NZS 1660.5.6

      Test methods for electric cables, cords and conductors - Fire tests - Test for vertical flame propagation for a single insulated wire or cable

  • The constitution of a Technical Committee consists of the Nominating Organisations that represent various interest groups across the industries. These Nominating Organisations are currently participating in Standards Australia’s Standards Development activity. The Nominating Organisation appoints a representative to represent the views of that organisation’s interest group during the development of a Standard.

    Constitution
     
  • Standards Australia participates in Standards development with the International standards bodies as listed below.

    For further information on ISO relationships please visit ISO’s website www.iso.org

    For further information on IEC relationships please visit IEC’s website www.iec.ch

    Organisation
    Title
    • IEC

      Electric cables for ships and mobile and fixed offshore units

    • IEC

      Electric cables

    • IEC

      Winding wires

    • IEC

      Overhead electrical conductors

  • Below is the list of current Standards developed and published by Standards Australia. This list does not display the obsolete, superseded, available superseded and withdrawn Standards. The published Standards are documents that set out specifications and procedures designed to ensure products, services and systems are safe, reliable and consistently perform the way they are intended to.

    Purchasing Standards

    To purchase a Standard, please contact our publishing partner SAI Global InfoStore.

    Designation
    Publication Title
    • AS 3158-2004

      Electric cables - Glass fibre insulated - For working voltages up to and including 0.6/1 (1.2) kV

    • AS 3158-2004 Rec:2016

      Electric cables - Glass fibre insulated - For working voltages up to and including 0.6/1 (1.2) kV

    • AS 3983-1991

      Metal drums for insulated electric cables and bare conductors

    • AS 3983-1991 Rec:2016

      Metal drums for insulated electric cables and bare conductors

    • AS 60092.350-2005

      Electrical installations in ships - Shipboard power cables - General construction and test requirements

    • AS 60092.351-2005

      Electrical installations in ships - Insulating materials for shipboard and offshore units, power, control, instrumentation, telecommunication and data cables

    • AS 60092.353-2005

      Electrical installations in ships - Single and multicore non-radial field power cables with extruded solid insulation for rated voltages 1 kV and 3 kV

    • AS 60092.354-2005

      Electrical installations in ships - Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)

    • AS 60092.359-2005

      Electrical installations in ships - Sheathing materials for shipboard power and telecommunication cables

    • AS 60092.376-2005

      Electrical installations in ships - Cables for control and instrumentation circuits 150/250 V (300 V)

    • AS/NZS 1026:2004 Rec:2017

      Electric cables - Impregnated paper insulated - For working voltages up to and including 19/33 (36) kV

    • AS/NZS 1026-2004

      Electric cables - Impregnated paper insulated - For working voltages up to and including 19/33 (36) kV

    • AS/NZS 1125:2001 Rec:2017

      Conductors in insulated electric cables and flexible cords

    • AS/NZS 1125-2001

      Conductors in insulated electric cables and flexible cords

    • AS/NZS 1125-2001 AMDT 1

      Conductors in insulated electric cables and flexible cords

    • AS/NZS 1194.1-1996

      Winding wires - Enamelled round copper winding wires

    • AS/NZS 1194.1-1996 AMDT 1

      Winding wires - Enamelled round copper winding wires

    • AS/NZS 1194.2-1996

      Winding wires - Enamelled rectangular copper winding wires

    • AS/NZS 1194.2-1996 AMDT 1

      Winding wires - Enamelled rectangular copper winding wires

    • AS/NZS 1194.3-1996

      Winding wires - Enamelled round aluminium winding wires

    • AS/NZS 1194.4-1996

      Winding wires - Enamelled rectangular aluminium winding wires

    • AS/NZS 1194.5-1996

      Winding wires - Test methods

    • AS/NZS 1429.1:2006 Rec:2017

      Electric cables - Polymeric insulated - Part 1: For working voltages 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV

    • AS/NZS 1429.1-2006

      Electric cables - Polymeric insulated - For working voltages 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV

    • AS/NZS 1429.2-2009

      Electric cables - Polymeric insulated - For working voltages above 19/33 (36) kV up to and including 87/150 (170) kV

    • AS/NZS 1660.1:1998 Rec:2017

      Test methods for electric cables, cords and conductors - Method 1: Conductors and metallic components

    • AS/NZS 1660.1-1998

      Test methods for electric cables, cords and conductors - Conductors and metallic components

    • AS/NZS 1660.2.1:1998 Rec:2017

      Test methods for electric cables, cords and conductors - Method 2.1: Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods for general application

    • AS/NZS 1660.2.1-1998

      Test methods for electric cables, cords and conductors - Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods for general application

    • AS/NZS 1660.2.1-1998 AMDT 1

      Test methods for electric cables, cords and conductors - Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods for general application

    • AS/NZS 1660.2.2:1998 Rec:2017

      Test methods for electric cables, cords and conductors - Method 2.2: Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to elastomeric, XLPE and XLPVC materials

    • AS/NZS 1660.2.2-1998

      Test methods for electric cables, cords and conductors - Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to elastomeric, XLPE and XLPVC materials

    • AS/NZS 1660.2.2-1998 AMDT 1

      Test methods for electric cables, cords and conductors - Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to elastomeric, XLPE and XLPVC materials

    • AS/NZS 1660.2.3:1998 Rec:2017

      Test methods for electric cables, cords and conductors - Method 2.3: Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to PVC and halogen free thermoplastic materials

    • AS/NZS 1660.2.3-1998

      Test methods for electric cables, cords and conductors, Method 2.3 Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to PVC and halogen free thermoplastic materials

    • AS/NZS 1660.2.3-1998 Amd 2:2017

      Test methods for electric cables, cords and conductors - Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to PVC and halogen free thermoplastic materials , Part 2.3:

    • AS/NZS 1660.2.3-1998 AMDT 1

      Test methods for electric cables, cords and conductors, Method 2.3 Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to PVC and halogen free thermoplastic materials

    • AS/NZS 1660.2.4:1998 Rec:2017

      Test methods for electric cables, cords and conductors - Method 2.4: Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to polyethylene and polypropylene materials

    • AS/NZS 1660.2.4-1998

      Test methods for electric cables, cords and conductors - Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to polyethylene and polypropylene materials

    • AS/NZS 1660.2.4-1998 AMDT 1

      Test methods for electric cables, cords and conductors - Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to polyethylene and polypropylene materials

    • AS/NZS 1660.2.5:1998 Rec:2017

      Test methods for electric cables, cords and conductors - Method 2.5: Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to cables above 1 kV

    • AS/NZS 1660.2.5-1998

      Test methods for electric cables, cords and conductors - Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to cables above 1 kV

    • AS/NZS 1660.2.5-1998 AMDT 1

      Test methods for electric cables, cords and conductors - Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to cables above 1 kV

    • AS/NZS 1660.2.5-1998 AMDT 2

      Test methods for electric cables, cords and conductors - Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to cables above 1 kV

    • AS/NZS 1660.3:1998 Rec:2017

      Test methods for electric cables, cords and conductors - Method 3: Electrical tests

    • AS/NZS 1660.3-1998

      Test methods for electric cables, cords and conductors - Electrical tests

    • AS/NZS 1660.3-1998 AMDT 1

      Test methods for electric cables, cords and conductors - Electrical tests

    • AS/NZS 1660.4:1998 Rec:2017

      Test methods for electric cables, cords and conductors - Method 4: Complete cable and flexible cord

    • AS/NZS 1660.4-1998

      Test methods for electric cables, cords, and conductors - Complete cable and flexible cord

    • AS/NZS 1660.4-1998 AMDT 1

      Test methods for electric cables, cords, and conductors - Complete cable and flexible cord

    • AS/NZS 1747-2003

      Reeling, trailing and feeder cables used for mining - Repair, testing and fitting of accessories

    • AS/NZS 1747-2003 AMDT 1

      Reeling, trailing and feeder cables used for mining - Repair, testing and fitting of accessories

    • AS/NZS 1802-2003

      Electric cables - Reeling and trailing - For underground coal mining purposes

    • AS/NZS 1972-2006

      Electric cables - Underground coal mines - Other than reeling and trailing

    • AS/NZS 1995:2003 Rec:2017

      Welding cables

    • AS/NZS 1995-2003

      Welding cables

    • AS/NZS 2276.1:2004 Rec:2017

      Cables for traffic signal installations - Part 1: Multicore power cables

    • AS/NZS 2276.1-2004

      Cables for traffic signal installations - Multicore power cables

    • AS/NZS 2276.2:1998 Rec:2017

      Cables for traffic signal installations - Part 2: Feeder cable for vehicle detectors

    • AS/NZS 2276.2-1998

      Cables for traffic signal installations - Feeder cable for vehicle detectors

    • AS/NZS 2276.3:2002 Rec:2017

      Cables for traffic signal installations - Part 3: Loop cable for vehicle detectors

    • AS/NZS 2276.3-2002

      Cables for traffic signal installations - Loop cables for vehicle detectors

    • AS/NZS 2373:2003 Rec:2017

      Electric cables - Twisted pair for control and protection circuits

    • AS/NZS 2373-2003

      Electric cables - Twisted pair for control and protection circuits

    • AS/NZS 2802-2000

      Electric cables - Reeling and trailing for mining and general use (other than underground coal mining)

    • AS/NZS 2802-2000 AMDT 1

      Electric cables - Reeling and trailing for mining and general use (other than underground coal mining)

    • AS/NZS 2857:1996 Rec:2017

      Timber drums for insulated electric cables and bare conductors

    • AS/NZS 2857-1996

      Timber drums for insulated electric cables and bare conductors

    • AS/NZS 2893:2002 Rec:2017

      Electric cables - Lead and lead alloy sheaths - Composition

    • AS/NZS 2893-2002

      Electric cables - Lead and lead alloy sheaths - Composition

    • AS/NZS 3166:1993 Rec:2017

      Approval and test specification - Cables for high voltage luminous discharge tube installations

    • AS/NZS 3166-1993

      Approval and test specification - Cables for high voltage luminous discharge tube installations

    • AS/NZS 3191-2008

      Electric flexible cords

    • AS/NZS 3560.1-2000

      Electric cables - Cross-linked polyethylene insulated - Aerial bundled - For working voltages up to and including 0.6/1(1.2)kV - Aluminium conductors

    • AS/NZS 3560.2:2003 Rec:2017

      Electric cables - Cross-linked polyethylene insulated - Aerial bundled - For working voltages up to and including 0.6/1 (1.2) kV - Part 2: Copper conductors

    • AS/NZS 3560.2-2003

      Electric cables - Cross-linked polyethylene insulated - Aerial bundled - For working voltages up to and including 0.6/1(1.2) kV - Copper conductors

    • AS/NZS 3599.1-2003

      Electric cables - Aerial bundled - Polymeric insulated - Voltages 6.35/11(12) kV and 12.7/22(24) kV - Metallic screened

    • AS/NZS 3599.2:1999 Rec:2017

      Electric cables - Aerial bundled - Polymeric insulated - Voltages 6.35/11(12) kV and 12.7/22(24) kV - Part 2: Non-metallic screened

    • AS/NZS 3599.2-1999

      Electric cables - Aerial bundled - Polymeric insulated - Voltages 6.35/11(12) kV and 12.7/22(24) kV - Non-metallic screened

    • AS/NZS 3675:2002 Rec:2017

      Conductors - Covered overhead - For working voltages 6.35/11 (12) kV up to and including 19/33 (36) kV

    • AS/NZS 3675-2002

      Conductors - Covered overhead - For working voltages 6.35/11(12) kV up to and including 19/33(36) kV

    • AS/NZS 3808:2000 Rec:2017

      Insulating and sheathing materials for electric cables

    • AS/NZS 3808-2000

      Insulating and sheathing materials for electric cables

    • AS/NZS 3808-2000 AMDT 1

      Insulating and sheathing materials for electric cables

    • AS/NZS 3808-2000 AMDT 2

      Insulating and sheathing materials for electric cables

    • AS/NZS 3863:2002 Rec:2017

      Galvanized mild steel wire for armouring of cables

    • AS/NZS 3863-2002

      Galvanized mild steel wire for armouring cables

    • AS/NZS 4026-2008

      Electric cables - For underground residential distribution systems

    • AS/NZS 4507:2006 Rec:2017

      Cables - Classification of characteristics when exposed to fire

    • AS/NZS 4507-2006

      Cables - Classification of characteristics when exposed to fire

    • AS/NZS 4805.1-2007

      Accessories for electric cables - Test requirements - Power cables with extruded insulation for rated voltages from 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV

    • AS/NZS 4805.2-2007

      Accessories for electric cables - Test requirements - Impregnated paper-insulated metal-sheathed cables for rated voltages from 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV (excluding gas-pressure and oil-filled cables)

    • AS/NZS 4961:2003 Rec:2017

      Electric cables - Polymeric insulated - For distribution and service applications

    • AS/NZS 4961-2003

      Electric cables - Polymeric insulated - For distribution and service applications

    • AS/NZS 5000.1:2005 Rec:2017

      Electric cables - Polymeric insulated - Part 1: For working voltages up to and including 0.6/1 (1.2) kV

    • AS/NZS 5000.1-2005

      Electric cables - Polymeric insulated - For working voltages up to and including 0.6/1 (1.2) kV

    • AS/NZS 5000.1-2005 AMDT 1

      Electric cables - Polymeric insulated - For working voltages up to and including 0.6/1 (1.2) kV

    • AS/NZS 5000.2:2006 Rec:2017

      Electric cables - Polymeric insulated - Part 2: For working voltages up to and including 450/750 V

    • AS/NZS 5000.2-2006

      Electric cables - Polymeric insulated - For working voltages up to and including 450/750 V

    • AS/NZS 5000.3:2003 Rec:2017

      Electric cables - Polymeric insulated - Part 3: Multicore control cables

    • AS/NZS 5000.3-2003

      Electric cables - Polymeric insulated - Multicore control cables

    • AS/NZS 60227.5-2003

      Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Flexible cables (cords)

    • AS/NZS 60227.5-2003 AMDT 1

      Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Flexible cables (cords)

    • AS/NZS 60245.4-2003

      Rubber insulated cables - Rated voltage up to and including 450/750 V - Cords and flexible cables

    • AS/NZS 60245.4-2003 AMDT 1

      Rubber insulated cables Rated voltage up to and including 450/750 V - Cords and flexible cables

    • AS/NZS 60702.1-2005

      Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Cables

    • AS/NZS 60702.2-2005

      Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Terminations

    • AS/NZS 60840-2006

      Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) - Test methods and requirements

    • AS/NZS IEC 60331.1:2017

      Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm

    • AS/NZS IEC 60331.2:2017

      Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm

    • AS/NZS IEC 60331.3:2017

      Tests for electric cables under fire conditions - Circuit integrity - Part 3: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure

    • AS/NZS IEC 60332.1.1:2017

      Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable Apparatus

    • AS/NZS IEC 60332.1.2:2017

      Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame

    • AS/NZS IEC 60332.1.3:2017

      Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles

    • AS/NZS IEC 60332.3.21:2017

      Tests on electric cables under fire conditions, Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R

    • AS/NZS IEC 60332.3.22:2017

      Tests on electric and optical fibre cables under fire conditions, Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables──Category A

    • AS/NZS IEC 60332.3.23:2017

      Tests on electric and optical fibre cables under fire conditions, Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables──Category B

    • AS/NZS IEC 60332.3.24:2017

      Tests on electric and optical fibre cables under fire conditions, Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables──Category C

    • AS/NZS IEC 60332.3.25:2017

      Tests on electric and optical fibre cables under fire conditions, Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables──Category D

    • AS/NZS IEC 60754.1:2017

      Test on gases evolved during combustion of materials from cables, Part 1: Determination of the halogen acid gas content

    • AS/NZS IEC 60754.2:2017

      Test on gases evolved during combustion of materials from cables, Part 2: Determination of acidity (by pH measurement) and conductivity

    • AS/NZS IEC 61034.1:2017

      Measurement of smoke density of cables burning under defined conditions, Part 1: Test apparatus

    • AS/NZS IEC 61034.2:2017

      Measurement of smoke density of cables burning under defined conditions, Part 2: Test procedure and requirements

  • The Sub Committees within the Technical Committee are listed here.

    Sub Committees