The committee's charter is defined in its Terms Of Reference [PDF].
Terms of Reference is subject to change

Active Projects0
Constitution0
International Relationships0
Published Standards0
Sub Committees0
Active Projects 0
Constitution 8
International Relationships 0
Published Standards 71
Sub Committees 0
  • This is a list of projects currently being worked on by Standards Australia's Standards Development Team.

    There are no active projects for this committee

  • The constitution of a Technical Committee consists of the Nominating Organisations that represent various interest groups across the industries. These Nominating Organisations are currently participating in Standards Australia’s Standards Development activity. The Nominating Organisation appoints a representative to represent the views of that organisation’s interest group during the development of a Standard.

    Constitution
     
  • Standards Australia participates in Standards development with the International standards bodies as listed below.

    For further information on ISO relationships please visit ISO’s website www.iso.org

    For further information on IEC relationships please visit IEC’s website www.iec.ch

    There are no international relationships for this committee

  • Below is the list of current Standards developed and published by Standards Australia. This list does not display the obsolete, superseded, available superseded and withdrawn Standards. The published Standards are documents that set out specifications and procedures designed to ensure products, services and systems are safe, reliable and consistently perform the way they are intended to.

    Purchasing Standards

    To purchase a Standard, please contact our publishing partner SAI Global InfoStore.

    Designation
    Publication Title
    • AS 1939 SUPP 1-1990

      Degrees of protection provided by enclosures for electrical equipment (IP Code) - Wallchart 1 (Supplement 1 to AS 1939-1990)

    • AS 1939 SUPP 2-1990

      Degrees of protection provided by enclosures for electrical equipment (IP Code) - Wallchart 2 (Supplement 2 to AS 1939-1990)

    • AS 60068.1-2003

      Environmental testing - General and guidance

    • AS 60068.2.10-2003

      Environmental testing - Tests - Test J and guidance: Mould growth

    • AS 60068.2.11-2003

      Environmental testing - Tests - Test Ka: Salt mist

    • AS 60068.2.1-2003

      Environmental testing - Tests - Test A: Cold

    • AS 60068.2.13-2003

      Environmental testing - Tests - Test M: Low air pressure

    • AS 60068.2.14-2003

      Environmental testing - Tests - Test N: Change of temperature

    • AS 60068.2.17-2003

      Environmental testing - Tests - Test Q: Sealing

    • AS 60068.2.18-2003

      Environmental testing - Tests - Test R and guidance: Water

    • AS 60068.2.20-2004

      Environmental testing - Tests - Test T: Soldering

    • AS 60068.2.21-2004

      Environmental testing - Tests - Test U: Robustness of terminations and integral mounting devices

    • AS 60068.2.2-2003

      Environmental testing - Tests - Test B: Dry heat

    • AS 60068.2.27-2003

      Environmental testing - Tests - Test Ea and guidance: Shock

    • AS 60068.2.29-2003

      Environmental testing - Tests - Test Eb and guidance: Bump

    • AS 60068.2.30-2003

      Environmental testing - Tests - Test Db and guidance: Damp heat, cyclic (12 + 12-hour cycle)

    • AS 60068.2.31-2003

      Environmental testing - Tests - Test Ec: Drop and topple, primarily for equipment-type specimens

    • AS 60068.2.32-2003

      Environmental testing - Tests - Test Ed: Free fall

    • AS 60068.2.33-2003

      Environmental testing - Tests - Guidance on change of temperature tests

    • AS 60068.2.38-2003

      Environmental testing - Tests - Test Z/AD: Composite temperature/humidity cyclic test

    • AS 60068.2.39-2003

      Environmental testing - Tests - Test Z/AMD: Combined sequential cold, low air pressure and damp heat test

    • AS 60068.2.40-2003

      Environmental testing - Tests - Test Z/AM: Combined cold/low air pressure tests

    • AS 60068.2.41-2003

      Environmental testing - Tests - Test Z/BM: Combined dry heat/low air pressure tests

    • AS 60068.2.42-2004

      Environmental testing - Tests - Test Kc: Sulphur dioxide test for contacts and connections

    • AS 60068.2.43-2004

      Environmental testing - Tests - Test Kd: Hydrogen sulphide test for contacts and connections

    • AS 60068.2.44-2004

      Environmental testing - Tests - Guidance on test T: Soldering

    • AS 60068.2.45-2003

      Environmental testing - Tests - Test XA and guidance: Immersion in cleaning solvents

    • AS 60068.2.46-2004

      Environmental testing - Tests - Guidance to test Kd: Hydrogen sulphide test for contacts and connections

    • AS 60068.2.47-2003

      Environmental testing - Tests - Mounting of compounds, equipment and other articles for vibration, impact and similar dynamic tests

    • AS 60068.2.48-2003

      Environmental testing - Tests - Guidance on the application of the tests of AS 60068 to simulate the effects of storage

    • AS 60068.2.49-2004

      Environmental testing - Tests - Guidance to Test Kc: Sulphur dioxide test for contacts and connections

    • AS 60068.2.50-2003

      Environmental testing - Tests - Test Z/Afc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens

    • AS 60068.2.51-2003

      Environmental testing - Tests - Test Z/BFc: Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens

    • AS 60068.2.5-2003

      Environmental testing - Tests - Test Sa: Simulated solar radiation at ground level

    • AS 60068.2.52-2003

      Environmental testing - Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)

    • AS 60068.2.53-2003

      Environmental testing - Tests - Guidance to tests Z/AFc and Z/BFc: Combined temperature (cold and dry heat) and vibration (sinusoidal) tests

    • AS 60068.2.54-2004

      Environmental testing - Tests - Test Ta: Soldering - Solderability testing by the wetting balance method

    • AS 60068.2.55-2003

      Environmental testing - Tests - Test Ee and guidance: Bounce

    • AS 60068.2.57-2003

      Environmental testing - Tests - Test Ff: Vibration - Time-history method

    • AS 60068.2.58-2004

      Environmental testing - Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)

    • AS 60068.2.59-2003

      Environmental testing - Tests - Test Fe: Vibration - Sine beat method

    • AS 60068.2.60-2003

      Environmental testing - Tests - Test Ke: Flowing mixed gas corrosion test

    • AS 60068.2.61-2003

      Environmental testing - Tests - Test Z/ABDM: Climate sequence

    • AS 60068.2.6-2003

      Environmental testing - Tests - Test Fc: Vibration (sinusoidal)

    • AS 60068.2.64-2003

      Environmental testing - Tests - Test Fh: Vibration, broad-band random (digital control) and guidance

    • AS 60068.2.65-2003

      Environmental testing - Tests - Test Fg: Vibration, acoustically induced

    • AS 60068.2.66-2003

      Environmental testing - Tests - Test Cx: Damp heat, steady state (unsaturated pressurized vapour)

    • AS 60068.2.67-2003

      Environmental testing - Tests - Test Cy: Damp heat, steady state accelerated test primarily intended for components

    • AS 60068.2.68-2003

      Environmental testing - Tests - Test L: Dust and sand

    • AS 60068.2.69-2004

      Environmental testing - Tests - Test Te: Soldering - Solderability testing of electronic components for surface mount technology by the wetting balance method

    • AS 60068.2.70-2003

      Environmental testing - Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands

    • AS 60068.2.7-2003

      Environmental testing - Tests - Test Ga and guidance: Acceleration, steady state

    • AS 60068.2.74-2003

      Environmental testing - Tests - Test Xc: Fluid contamination

    • AS 60068.2.75-2003

      Environmental testing - Tests - Test Eh: Hammer tests

    • AS 60068.2.77-2004

      Environmental testing - Tests - Test 77: Body strength and impact shock

    • AS 60068.2.78-2003

      Environmental testing - Tests - Test Cab: Damp heat, steady state

    • AS 60068.2.81-2004

      Environmental testing - Tests - Test Ei: Shock - Shock response spectrum synthesis

    • AS 60068.2.9-2003

      Environmental testing - Tests - Guidance for solar radiation testing

    • AS 60068.3.1-2003

      Environmental testing - Background information - Section one: Cold and dry heat tests

    • AS 60068.3.1A-2003

      Environmental testing - Background information - Section one: Cold and dry heat tests - First supplement

    • AS 60068.3.2-2003

      Environmental testing - Background information - Combined temperature/low air pressure tests

    • AS 60068.3.3-2003

      Environmental testing - Guidance - Seismic test methods for equipment

    • AS 60068.3.4-2003

      Environmental testing - Supporting documentation and guidance - Damp heat tests

    • AS 60068.3.4-2003 AMDT 1

      Environmental testing - Supporting documentation and guidance - Damp heat tests

    • AS 60068.3.5-2003

      Environmental testing - Supporting documentation and guidance - Confirmation of the performance of temperature chambers

    • AS 60068.3.6-2003

      Environmental testing - Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers

    • AS 60068.3.7-2003

      Environmental testing - Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load)

    • AS 60068.3.8-2004

      Environmental testing - Supporting documentation and guidance - Selecting amongst vibration tests

    • AS 60068.4-2003

      Environmental testing - Information for specification writers - Test summaries

    • AS 60068.5.2-2003

      Environmental testing - Guide to drafting of test methods - Terms and definitions

    • AS 60529-2004

      Degrees of protection provided by enclosures (IP Code)

  • The Sub Committees within the Technical Committee are listed here.

    There are no sub committees for this committee