-
This is a list of projects currently being worked on by Standards Australia's Standards Development Team.
There are no active projects for this committee
-
The constitution of a Technical Committee consists of the Nominating Organisations that represent various interest groups across the industries. These Nominating Organisations are currently participating in Standards Australia’s Standards Development activity. The Nominating Organisation appoints a representative to represent the views of that organisation’s interest group during the development of a Standard.
-
Australian Chamber of Commerce and Industry
-
Australian Diecasting Association
-
Australian Industry Group
-
Australian Maritime Safety Authority
-
Chamber of Commerce and Industry Queensland
-
Co-opted Member
-
Department of Defence (Australian Government)
-
Engineers Australia
-
For Information
-
Lifting Equipment Engineers Association
-
National Association of Testing Authorities Australia
-
NSW Department of Planning and Environment
-
SafeWork NSW
-
The Crane Industry Council of Australia
-
The Institute of Quarrying Australia
-
WorkSafe Victoria
-
Standards Australia participates in Standards development with the International standards bodies as listed below.
For further information on ISO relationships please visit ISO’s website www.iso.org
For further information on IEC relationships please visit IEC’s website www.iec.ch
-
-
Components and accessories
-
Round steel link chains, chain slings, components and accessories
-
Below is the list of current Standards developed and published by Standards Australia. This list does not display the obsolete, superseded, available superseded and withdrawn Standards. The published Standards are documents that set out specifications and procedures designed to ensure products, services and systems are safe, reliable and consistently perform the way they are intended to.
Purchasing Standards
To purchase a Standard, please contact our publishing partner SAI Global
InfoStore.
Designation
Publication Title
-
Specifies requirements for thimbles that are suitable for use with Grade 1770, galvanized or ungalvanized, round strand, equal lay, 6 (36 or 6) 19 construction groups Seale-Warrington + IWRC steel wire ropes.
-
Flat synthetic-webbing slings - Product specification
Specifies requirements for flat synthetic-webbing slings that are intended for lifting purposes. It does not apply to slings that have been repaired. Guidance on information that should be supplied with enquiries and orders is given in an Appendix.
-
Flat synthetic-webbing slings - Product specification
-
Flat synthetic-webbing slings - Part 1: Product specification
-
Flat synthetic-webbing slings - Care and use
Sets out recommended practices for the care and use of flat synthetic-webbing slings, but does not consider repairs to such slings or the use of such slings for the lifting of personnel.
-
Flat synthetic-webbing slings, Part 2: Care and use
-
Wire-coil flat slings - Product specification
Specifies requirements for wire-coil flat slings that are intended for lifting purposes. Guidance on information that should be supplied with enquiries and orders is given in an appendix.
-
Wire-coil flat slings - Part 1: Product specification
-
Wire-coil flat slings - Care and use
Sets out practices for the care and use of wire-coil flat slings, but does not consider repairs to such slings or the use of such slings for the lifting of personnel.
-
Wire-coil flat slings - Part 2: Care and use
-
Wire-rope slings-Product specification
Specifies requirements for wire-rope slings, including grommets and wire-rope sling assemblies, for general conditions of use. Wire rope slings consist of steel-wire rope and often include end terminations, such as ferrule-secured eyes, poured sockets or swage fittings. Appendices include guidance on information that should be supplied with enquiries and orders, and conditions for application of test forces.
-
Wire-rope slings-Care and use
Sets out practices for the care and use of wire-rope slings under general conditions of use.
-
Wire-rope grips for non-lifting applications
Specifies requirements for wire-rope grips for non-lifting applications that are used with steel-wire ropes having a diameter of not less than 8 mm. Information that should be supplied with enquiries and orders is given in an appendix.
-
Wire-rope grips for non-lifting applications
-
Sheave blocks for lifting purposes
Specifies requirements for general purpose sheave blocks for lifting purposes. Guidance on information that should be supplied with enquiries and orders, on care and use and on use for non-lifting applications, is given in appendices.
-
Lifting points, Part 1: Collared eyebolts and collared eyenuts - Grade 4
This Standard specifies requirements for Grade 4 forged collared eyebolts and collared eyenuts used for lifting.
-
Lifting points, Part 1: Collared eyebolts and collared eyenuts - Grade 4
This Standard specifies requirements for Grade 4 forged collared eyebolts and collared eyenuts used for lifting.
-
Swivels for lifting applications
Specifies requirements for manufacture, marking and testing of swivels for hoists. It does not include dimensional requirements for size. Guidance on information to be supplied with enquiries and orders and on care and use is given in appendices.
-
Rigging screws and turnbuckles
Specifies requirements for forged rigging screws and forged turnbuckles used in tension. It does not apply to rigging screws or turnbuckles that are used in compression or are smaller than 10 mm. Guidance on information that should be supplied with enquiries and orders and on care and use in appendices.
-
Rigging screws and turnbuckles
-
Short-link chain for lifting purposes
Specifies requirements for non-calibrated short-link chain for lifting purposes, which is manufactured from welded round-steel short links.
-
Specifies requirements for general purpose wedge-type sockets. It does not cover wedge-type sockets of welded construction, for special purpose applications or where installed in lift installations. Guidance on information that should be supplied with enquiries and orders and guidance on care and use is given in appendices.
-
-
Specifies requirements for forged shackles. Guidance on information that should be supplied with inquiries and orders and on the care and use of shackles is gievn in Appendices.
-
-
-
-
End fittings for synthetic flat-webbing and round slings
Specifies requirements for the manufacture, marking, and testing of metal end fittings that may be attached to the ends of flat synthetic webbing to form slings complying with AS 1353.1 or may be attached to synthetic fibre round slings complying with AS 4497.1.
-
Chain slings for lifting purposes - Grade T(80) and V(100) Product specification
Specifies requirements for chain slings using Grade T(80) and V(100) chain complying with AS 2321.
-
AS 3775.1:2014 Amd 1:2015
Chain slings for lifting purposes - Grade T(80) and V(100) Product Specification
-
AS 3775.1:2014 Amd 2:2015
Chain slings for lifting purposes - Grade T(80) and V(100) Product Specification
-
Chain slings for lifting purposes - Grade T(80) and V(100) Care and use
Sets out requirements and recommendations on practices for the care and use of Grade T(80) and V(100) chain slings, which are specified in AS3775.1.
-
AS 3775.2:2014 Amd 1:2015
Chain slings for lifting purposes - Grade T(80) and V(100) Care and use
-
Lifting components for Grade T(80) and V(100) chain slings
Specifies requirements for forged lifting components for use in chain sling assemblies with corresponding sizes of Grade T chain complying with AS2321. The components include hooks with eyes, clevises or other joining devices, mechanical connecting devices, and any other terminal fittings used in a lifting system based on Grade T chain. This Standard does not apply to welded components other than welded master links, welded multilink assemblies, welded joining links, or components subject to an existing Australian Standard.
-
Shank hooks and large eye hooks - Maximum 60 t
Specifies requirements for the design, manufacture, marking and testing of forged lifting hooks having a working load limit of not more than 60 t, for use with wire rope, sheave blocks, serial hoists or general engineering applications. It covers large eye hooks and shank hooks.
-
Roundslings - Synthetic Fibre
This Standard specifies requirements and recommendations for manufacture, care and use of roundslings made of synthetic fibre, which may include end fittings that are intended for lifting purposes. This Standard does not address the use of roundslings for the lifting of personnel
-
Stainless steel chain for lifting purposes
Specifies requirements for non-calibrated short-link stainless steel chain for lifting purposes, manufactured from electrically welded round stainless steel short links.
-
Offshore containers and associated lifting sets - Offshore containers - Design, manufacture and marking
Adopts EN 12079-1:2006, with Australian variations, to specify requirements for the design, manufacture and marking of offshore freight and service containers with maximum gross mass not exceeding 25 000 kg, intended for repeated use to, from and between offshore installations and ships.
-
Offshore containers and associated lifting sets - Lifting sets - Design, manufacture and marking
Adopts EN 12079-2:2006, with Australian modifications, to specify requirements for lifting sets for use with containers in offshore service.
-
Offshore containers and associated lifting sets - Periodic inspection, examination and testing
Adopts EN 12079.3-2010 to specify requirements for the periodic inspection, examination and testing of offshore freight and service containers built in accordance with AS EN 12079-1, with maximum gross mass not exceeding 25 000 kg and their associated lifting sets, intended for repeated use to, from and between offshore installations and ships. Inspection requirements following damage and repair of offshore containers are also included.
-
The Sub Committees within the Technical Committee are listed here.
-
ME-025-00 Dummy