The committee's charter is defined in its Terms Of Reference [PDF].
Terms of Reference is subject to change

Active Projects0
Constitution0
International Relationships0
Published Standards0
Sub Committees0
Active Projects 5
Constitution 25
International Relationships 6
Published Standards 53
Sub Committees 1
  • This is a list of projects currently being worked on by Standards Australia's Standards Development Team.

    Project Code
    Project Title
    • AS 1237.2

      Tolerances for fasteners - Part 2:Washers for bolts, screws and nuts - Product grades A, C and F

    • AS 1559

      Hot-dip galvanized steel bolts and associated nuts and washers for tower construction

    • AS 5216

      Design of post-installed and cast-in fastenings in concrete

    • AS/NZS 1252.1

      High strength steel bolts with associated nuts and washers for structural engineering

    • AS/NZS 4291.2

      Mechanical properties of fasteners - Nuts with specified proof load values - Coarse thread

  • The constitution of a Technical Committee consists of the Nominating Organisations that represent various interest groups across the industries. These Nominating Organisations are currently participating in Standards Australia’s Standards Development activity. The Nominating Organisation appoints a representative to represent the views of that organisation’s interest group during the development of a Standard.

    Constitution
     
  • Standards Australia participates in Standards development with the International standards bodies as listed below.

    For further information on ISO relationships please visit ISO’s website www.iso.org

    For further information on IEC relationships please visit IEC’s website www.iec.ch

    Organisation
    Title
    • ISO

      Fasteners with metric external thread

    • ISO

      Fasteners with metric internal thread

    • ISO

      Fasteners with non-metric thread

    • ISO

      Surface coatings

    • ISO

      Reference standards

    • ISO

      Fasteners

  • Below is the list of current Standards developed and published by Standards Australia. This list does not display the obsolete, superseded, available superseded and withdrawn Standards. The published Standards are documents that set out specifications and procedures designed to ensure products, services and systems are safe, reliable and consistently perform the way they are intended to.

    Purchasing Standards

    To purchase a Standard, please contact our publishing partner SAI Global InfoStore.

    Designation
    Publication Title
    • AS 1014-1986

      Gauging of metric screw threads

    • AS 1110.1:2015

      ISO metric hexagon bolts and screws - Product grades A and B - Part 1: Bolts

    • AS 1110.2:2015

      ISO metric hexagon bolts and screws - Product grades A and B - Part 2: Screws

    • AS 1111.1:2015

      ISO metric hexagon bolts and screws - Product grade C - Part 1: Bolts

    • AS 1111.2:2015

      ISO metric hexagon bolts and screws - Product grade C - Part 2: Screws

    • AS 1112.1:2015

      ISO metric hexagon nuts - Part 1: Style 1 - Product grades A and B

    • AS 1112.2:2015

      ISO metric hexagon nuts - Part 2: Style 2 - Product grades A and B

    • AS 1112.3:2015

      ISO metric hexagon nuts - Part 3: Product grade C

    • AS 1112.4:2015

      ISO metric hexagon nuts - Part 4: Chamfered thin nuts - Product grades A and B

    • AS 1237.1-2002

      Plain washers for metric bolts, screws and nuts for general purposes - General plan

    • AS 1237.1-2002 Amd 1:2015

      Plain washers for metric bolts, screws and nuts for general purposes

    • AS 1237.1-2002 Rec:2015

      Plain washers for metric bolts, screws and nuts for general purposes - Part 1: General plan

    • AS 1237.2:2016

      Tolerances for fasteners - Part 2:Washers for bolts, screws and nuts - Product grades A, C and F

    • AS 1275-1985

      Metric screw threads for fasteners

    • AS 1275-1985 AMDT 1

      Metric screw threads for fasteners

    • AS 1275-1985 REC:2017

      Metric screw threads for fasteners

    • AS 1420-2008

      ISO metric hexagon socket head cap screws

    • AS 1420-2008 Rec:2015

      ISO metric hexagon socket head cap screws

    • AS 1721-1985

      General purpose metric screw threads

    • AS 1721-1985 AMDT 1

      General purpose metric screw threads

    • AS 1721-1985 REC:2017

      General purpose metric screw threads

    • AS 1722.2-1992

      Pipe threads of Whitworth form - Fastening pipe threads

    • AS 1722.2-1992 REC:2017

      Pipe threads of Whitworth form - Fastening pipe threads

    • AS 1897:2016

      Fasteners - Electroplated coatings

    • AS 2334-1980

      Steel nails - Metric series

    • AS 2334-1980 Rec:2015

      Steel nails - Metric series

    • AS 2528-1982

      Bolts, studbolts and nuts for flanges and other high and low temperature applications

    • AS 3501-1987

      Parallel screw threads of Whitworth form (BSW and BSF) and associated gauges and gauging practice

    • AS 3501-1987 REC:2017

      Parallel screw threads of Whitworth form (BSW and BSF) and associated gauges and gauging practice

    • AS 3566.1-2002

      Self-drilling screws for the building and construction industries - General requirements and mechanical properties

    • AS 3566.1-2002 Rec:2015

      Self-drilling screws for the building and construction industries - Part 1: General requirements and mechanical properties

    • AS 3635-1990

      Unified (ISO inch) screw threads, associated gauges, and gauging practice

    • AS 3635-1990 REC:2017

      Unified (ISO inch) screw threads, associated gauges, and gauging practice

    • AS 4291.1:2015

      Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs

    • AS 4291.5:2015

      Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners not under tensile stresses

    • AS 4291.7-2000

      Mechanical properties of fasteners made of carbon steel and alloy steel - Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm.

    • AS 4291.7-2000 Rec:2015

      Mechanical properties of fasteners made of carbon steel and alloy steel - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm

    • AS 5066-2002

      Tolerances for ISO metric bolts, screws, studs and nuts - Product grades A, B and C

    • AS 5066-2002 Rec:2016

      Tolerances for ISO metric bolts, screws, studs and nuts - Product grades A, B and C

    • AS ISO 7.1-2008

      Pipe threads where pressure-tight joints are made on the threads - Dimensions, tolerances and designation

    • AS ISO 7.1-2008 REC:2017

      Pipe threads where pressure-tight joints are made on the threads - Dimensions, tolerances and designation

    • AS ISO 7.2-2008

      Pipe threads where pressure-tight joints are made on the threads - Verification by means of limit gauges

    • AS ISO 7.2-2008 REC:2017

      Pipe threads where pressure-tight joints are made on the threads - Verification by means of limit gauges

    • AS/NZS 1214:2016

      Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) (ISO 10684:2004, MOD)

    • AS/NZS 1252.1:2016

      High-strength steel fastener assemblies for structural engineering - Bolts, nuts and washers - Part 1: Technical requirements

    • AS/NZS 1252.2:2016

      High-strength steel fastener assemblies for structural engineering - Bolts, nuts and washers - Part 2: Verification testing for bolt assemblies

    • AS/NZS 1390:1997 Rec:2016

      Cup head bolts with ISO metric coarse pitch threads

    • AS/NZS 1390-1997

      Cup head bolts with ISO metric coarse pitch threads

    • AS/NZS 1393:1996 Rec:2016

      Coach screws - Metric series with ISO hexagon heads

    • AS/NZS 1393-1996

      Coach screws - Metric series with ISO hexagon heads

    • AS/NZS 1559-1997

      Hot-dip galvanized steel bolts with associated nuts and washers for tower construction

    • AS/NZS 2451:1998

      Bolts, screws and nuts with British Standard Whitworth threads (rationalized series)

    • AS/NZS 2451:1998 Rec:2016

      Bolts, screws and nuts with British Standard Whitworth threads (rationalized series)

    • AS/NZS 2465:1999

      Unified hexagon bolts, screws and nuts (UNC and UNF threads)

    • AS/NZS 2465:1999 AMDT 1

      Unified hexagon bolts, screws and nuts (UNC and UNF threads

    • AS/NZS 2465:1999 Rec:2016

      Unified hexagon bolts, screws and nuts (UNC and UNF threads)

    • AS/NZS 4291.2:2016

      Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread

    • AS/NZS 4402:2015

      Hexagon head tapping screws

    • AS/NZS 4403:2015

      Slotted pan head tapping screws

    • AS/NZS 4404:2015

      Slotted countersunk (flat) head tapping screws (common head style)

    • AS/NZS 4405:2015

      Slotted raised countersunk (oval) head tapping screws (common head style)

    • AS/NZS 4406:2015

      Cross recessed pan head tapping screws

    • AS/NZS 4407:2015

      Cross recessed countersunk (flat) head tapping screws (common head style)

    • AS/NZS 4408:2015

      Cross recessed raised countersunk (oval) head tapping screw

    • AS/NZS 4409:2015

      Hexagon washer head tapping screws

    • AS/NZS 4410:2015

      Hexagon flange head tapping screws

    • AS/NZS 4411:2015

      Tapping screws thread

    • AS/NZS 4412:2015

      Heat-treated steel tapping screws - Mechanical properties

    • SA TS 101:2015

      Design of Post-installed and cast-in fastenings for use in concrete

  • The Sub Committees within the Technical Committee are listed here.

    Sub Committees