-
This is a list of projects currently being worked on by Standards Australia's Standards Development Team.
Project Code
Project Title
-
Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium
-
The constitution of a Technical Committee consists of the Nominating Organisations that represent various interest groups across the industries. These Nominating Organisations are currently participating in Standards Australia’s Standards Development activity. The Nominating Organisation appoints a representative to represent the views of that organisation’s interest group during the development of a Standard.
-
Australasian Corrosion Association
-
Australian Building Codes Board
-
Australian Foundry Institute
-
Australian Industry Group
-
Australian Institute of Architects
-
Australian Steel Association
-
Australian Steel Institute
-
Bureau of Steel Manufacturers of Australia Limited
-
Employers And Manufacturers Association
-
Independent
-
Materials Australia
-
New Zealand Heavy Engineering Research Association
-
Society of Automotive Engineers- Australasia
-
Standards New Zealand
-
Standards Australia participates in Standards development with the International standards bodies as listed below.
For further information on ISO relationships please visit ISO’s website www.iso.org
For further information on IEC relationships please visit IEC’s website www.iec.ch
There are no international relationships for this committee
-
Below is the list of current Standards developed and published by Standards Australia. This list does not display the obsolete, superseded, available superseded and withdrawn Standards. The published Standards are documents that set out specifications and procedures designed to ensure products, services and systems are safe, reliable and consistently perform the way they are intended to.
Purchasing Standards
To purchase a Standard, please contact our publishing partner SAI Global
InfoStore.
Designation
Publication Title
-
Round steel wire for ropes
Specifies requirements for cold-drawn, carbon steel wire of round cross-section in diameters 0.20 mm and over, intended for the manufacture of rope and strand. Covers wire in the bright (black) condition, drawn metallic-coated condition (drawn after coating) or finally metallic-coated condition (coated as a final operation). Coatings may be of zinc (hot-dipped or electrodeposited) or of hot-dip zinc/aluminium alloy.
-
Round steel wire for ropes
-
Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium
Specifies requirements for continuously hot-dip metallic coated sheet steel and strip supplied in thicknesses up to and including 5.0 mm.
-
Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium
-
Carbon steels and carbon-manganese steels - Hot rolled bars and semi-finished products
Specifies the requirements for carbon steel and carbon-manganese steel rods, bars, blooms, billets and slabs, delivered in the as-rolled or normalized condition, for forging and for general engineering purposes.
-
Carbon steels and carbon-manganese steels - Hot rolled bars and semi-finished products
RECONFIRMATION OF AS 1442-2007 Carbon steels and carbon-manganese steels - Hot rolled bars and semi-finished products
-
Carbon and carbon-manganese steel - Cold-finished bars
Specifies requirements for cold-finished carbon steel and carbon-manganese steel bars manufactured from hot-rolled bars and semifinished products for general engineering purposes.
-
Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties
Specifies requirements for wrought alloy steels intended for general engineering purposes and is applicable to hot-rolled or cold-finished bars for machines, booms, billets and slabs for forgings, and forgings.
-
Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties
-
Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties
RECONFIRMATION OF AS 1444-2007 Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties
-
Specifies the requirements for hot-rolled carbon, carbon-chromium, nickel-chromium-molybdenum and silicon-manganese spring steels which are in either the as-rolled, annealed or normalized condition.
-
RECONFIRMATION FOR AS 1447-2007 Hot-rolled spring steels
-
Steel tubes for mechanical purposes
Specifies the requirements for the production and supply of carbon and carbon-manganese steel tubes of round, square, rectangular or other non-circular cross-section produced by either cold-forming or hot-forming, and intended for use in mechanical applications.
-
Steel tubes for mechanical purposes
RECONFIRMATION OF AS 1450-2007 Steel tubes for mechanical purposes
-
Carbon steel spring wire for mechanical springs
Specifies requirements for carbon steel spring wire of round cross-section for mechanical springs, supplied in the following forms: hard-drawn, drawn metallic coated, oil-hardened and tempered, or soft-drawn.
-
Carbon steel spring wire for mechanical springs
-
Adopts ISO 185:2005 to specify properties of unalloyed and low-alloyed grey cast irons used for castings, which have been manufactured in sand moulds or in moulds with comparable thermal behaviour.
-
RECONFIRMATION OF AS 1830-2007 Grey cast iron
-
Adopts ISO 1083:2004 to specify the classification of ductile cast irons based on mechanical properties.
-
Adopts ISO 1083:2004 to specify the classification of ductile cast irons based on mechanical properties.
-
Adopts ISO 1083:2004 to specify the classification of ductile cast irons based on mechanical properties.
-
Adopts ISO 1083:2004 to specify the classification of ductile cast irons based on mechanical properties.
-
RECONFIRMATION OF AS 1831-2007 Ductile cast iron
-
Adopts ISO 5922:2005 to specify the classification of malleable cast irons based on mechanical properties.
-
RECONFIRMATION OF AS 1832-2007 Malleable cast iron
-
Methods for the measurement of case depth in steels
Specifies methods for the measurement of case depths of up to 3 mm produced by carburizing, nitriding, carbo-nitriding or cyaniding heat treatment processes, in steel products. It includes hardness, micro-hardness, micrographic, macroscopic, chemical and spectrometric methods.
-
Methods for the measurement of case depth in steels
-
Carbon and low alloy steel - Measurement of decarburization
Specifies micrographic, hardness, micro-hardness, spectrometric and chemical tests for the measurement of the depth of decarburization in carbon and low alloy steel products.
-
Carbon and low alloy steel - Measurement of decarburization
-
Carbon steel spring wire for bedding and seating
Specifies requirements for carbon steel spring wire of round cross-section supplied in the hard-drawn condition, for the manufacture of coil springs (including helical lacing springs), square-formed springs and sinuous springs for bedding and seating used in the automotive, transport and furniture manufacturing industries.
-
Carbon steel spring wire for bedding and seating
-
Preferred dimensions of wrought metal products
Specifies the preferred sizes, or dimensions, of wrought metal products manufactured from steel (hot-rolled and bright), copper, copper alloys, aluminium and aluminium alloys.
-
Steel sheet and strip - Cold-rolled, electrolytic zinc-coated
Specifies three grades of cold-rolled unalloyed low carbon steel sheet produced on a continuous mill and zinc coated by an electrolytic process. Supplied as coil or cut lengths in thicknesses from 0.3 mm to 2 mm and in widths from 15 mm to 1250 mm.
-
Steel sheet and strip - Cold-rolled, electrolytic zinc-coated
-
Steel sheet and strip - Terne (lead-tin alloy) coated
Specifies flat steel sheet and strip, in thicknesses from 0.6 to 2 mm and up to 1220 mm wide, terne-coated by the hot dip process. Provision is made for four grades of steel and three classes of terne coating.
-
Steel sheet and strip - Terne (lead-tin alloy) coated
-
Founding - Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores
Specifies the requirements for patterns, pattern equipment and coreboxes for the production of sand moulds and/or sand cores.
-
Tolerances for flat-rolled steel products
Specifies dimensional tolerances for flat-rolled steels in the form of wide slabs, plate and floorplate rolled on a reversing mill, hot-rolled plate, floorplate, sheet and strip rolled on a continuous mill and cold-rolled sheet and strip. It does not apply to stainless, high alloy and quenched and tempered steels. Two classes of tolerance (A and B) are specified; Class B being the more stringent.
-
Tolerances for flat-rolled steel products
Specifies dimensional tolerances for flat-rolled steels in the form of wide slabs, plate and floorplate rolled on a reversing mill, hot-rolled plate, floorplate, sheet and strip rolled on a continuous mill and cold-rolled sheet and strip. It does not apply to stainless, high alloy and quenched and tempered steels. Two classes of tolerance (A and B) are specified; Class B being the more stringent.
-
Tolerances for flat-rolled steel products
Specifies dimensional tolerances for flat-rolled steels in the form of wide slabs, plate and floorplate rolled on a reversing mill, hot-rolled plate, floorplate, sheet and strip rolled on a continuous mill and cold-rolled sheet and strip. It does not apply to stainless, high alloy and quenched and tempered steels. Two classes of tolerance (A and B) are specified; Class B being the more stringent.
-
AS/NZS 1365:1996 Amd 1:2014
Tolerances for flat-rolled steel products
Specifies dimensional tolerances for flat-rolled steels in the form of wide slabs, plate and floorplate rolled on a reversing mill, hot-rolled plate, floorplate, sheet and strip rolled on a continuous mill and cold-rolled sheet and strip. It does not appl
-
AS/NZS 1365:1996 Amd 1:2014
Tolerances for flat-rolled steel products
Specifies dimensional tolerances for flat-rolled steels in the form of wide slabs, plate and floorplate rolled on a reversing mill, hot-rolled plate, floorplate, sheet and strip rolled on a continuous mill and cold-rolled sheet and strip. It does not appl
-
AS/NZS 1365:1996 Amd 1:2014
Tolerances for flat-rolled steel products
Specifies dimensional tolerances for flat-rolled steels in the form of wide slabs, plate and floorplate rolled on a reversing mill, hot-rolled plate, floorplate, sheet and strip rolled on a continuous mill and cold-rolled sheet and strip. It does not appl
-
AS/NZS 1365:1996 Amd 1:2014
Tolerances for flat-rolled steel products
Specifies dimensional tolerances for flat-rolled steels in the form of wide slabs, plate and floorplate rolled on a reversing mill, hot-rolled plate, floorplate, sheet and strip rolled on a continuous mill and cold-rolled sheet and strip. It does not appl
-
AS/NZS 1365:1996 Amd 1:2014
Tolerances for flat-rolled steel products
Specifies dimensional tolerances for flat-rolled steels in the form of wide slabs, plate and floorplate rolled on a reversing mill, hot-rolled plate, floorplate, sheet and strip rolled on a continuous mill and cold-rolled sheet and strip. It does not appl
-
AS/NZS 1365:1996 Rec:2016
Tolerances for flat-rolled steel products
-
Tolerances for flat-rolled steel products
Specifies dimensional tolerances for flat-rolled steels in the form of wide slabs, plate and floorplate rolled on a reversing mill, hot-rolled plate, floorplate, sheet and strip rolled on a continuous mill and cold-rolled sheet and strip. It does not apply to stainless, high alloy and quenched and tempered steels. Two classes of tolerance (A and B) are specified; Class B being the more stringent.
-
AS/NZS 1594:2002 Rec:2016
Hot-rolled steel flat products
-
Hot-rolled steel flat products
Specifies requirements for hot-rolled steel plate, floor plate, steel and strip rolled on a continuous mill, in thicknesses up to 8 mm for formability and extra formability grades, and up to 16 mm for other grades, and for widths up to 2000 mm. It includes slit material, provided that the parent metal has an as-rolled width of not less than 600 mm.
-
AS/NZS 1595:1998 Rec:2016
Cold-rolled, unalloyed, steel sheet and strip
-
Cold-rolled, unalloyed, steel sheet and strip
Specifies requirements for cold-rolled, unalloyed, steel sheet and strip, supplied as both coil and cut lengths to chemical composition only, or to strength, hardness or formability requirements. It also specifies two surface finishes (lustre and matt) and three levels of surface quality.
-
AS/NZS 1595-1998 Amd 1:2014
Cold-rolled, unalloyed, steel sheet and strip
Specifies requirements for cold-rolled, unalloyed, steel sheet and strip, supplied as both coil and cut lengths to chemical composition only, or to strength, hardness or formability requirements. It also specifies two surface finishes (lustre and matt) an
-
AS/NZS 4496:1997 Rec:2016
Recommended practice for the colour coding of steel products
-
Recommended practice for the colour coding of steel products
Gives a recommended practice for the colour coding of steel products of various wrought forms and alloy designations for identification purposes. Also includes a colour-coding system to indicate product thickness. An appendix gives details of colour formulations.
-
The Sub Committees within the Technical Committee are listed here.
-
MT-001-00 Dummy
-
MT-001-01 Carbon And Alloy Steels
-
MT-001-02 Tool Steels
-
MT-001-03 Steel Castings
-
MT-001-04 Iron Castings
-
MT-001-06 Steel Flat Products
-
MT-001-14 Heat Treatment of Ferrous Materials
-
MT-001-15 Patterns