The committee's charter is defined in its Terms Of Reference [PDF].
Terms of Reference is subject to change

Active Projects0
Constitution0
International Relationships0
Published Standards0
Sub Committees0
Active Projects 2
Constitution 12
International Relationships 7
Published Standards 46
Sub Committees 2
  • This is a list of projects currently being worked on by Standards Australia's Standards Development Team.

    Project Code
    Project Title
    • AS/NZS 4130

      Polyethylene (PE) pipes for pressure applications

    • AS/NZS 4131-2010 Amd 2

      Polyethylene (PE) compounds for pressure pipes and fittings

  • The constitution of a Technical Committee consists of the Nominating Organisations that represent various interest groups across the industries. These Nominating Organisations are currently participating in Standards Australia’s Standards Development activity. The Nominating Organisation appoints a representative to represent the views of that organisation’s interest group during the development of a Standard.

    Constitution
     
  • Standards Australia participates in Standards development with the International standards bodies as listed below.

    For further information on ISO relationships please visit ISO’s website www.iso.org

    For further information on IEC relationships please visit IEC’s website www.iec.ch

    Organisation
    Title
    • ISO

      Plastics Pipes and Fittings for Soil, Waste and Drainage (Including Land Drainage)

    • ISO

      Plastics Pipes and Fittings for Water Supples

    • ISO

      Plastics pipes and fittings for inundustrial applications

    • ISO

      Plastics Pipes and Fittings for the Supply of Gaseous Fuels

    • ISO

      General Properties of Pipes, Fittings and Valves of Plastics Materials and their Accessories---Test Methods and Basic Specifications

    • ISO

      Rehabilitation of pipeline systems

    • ISO

      Plastics pipes, fittings and valves for the transport of fluids

  • Below is the list of current Standards developed and published by Standards Australia. This list does not display the obsolete, superseded, available superseded and withdrawn Standards. The published Standards are documents that set out specifications and procedures designed to ensure products, services and systems are safe, reliable and consistently perform the way they are intended to.

    Purchasing Standards

    To purchase a Standard, please contact our publishing partner SAI Global InfoStore.

    Designation
    Publication Title
    • AS 1462.24-2003

      Methods of test for plastics pipes and fittings - Determination of resistance to crack propagation - Test methods for slow crack growth in notched pipes (notch test)

    • AS 2537-1994 AMDT 1

      Mechanical jointing fittings for use with cross-linked polyethylene (PE-X) pipe for hot and cold water applications

    • AS 2698.2-2000

      Plastics pipes and fittings for irrigation and rural applications - Polyethylene rural pipe

    • AS 2698.2-2000 Rec:2017

      Plastics pipes and fittings for irrigation and rural applications - Part 2: Polyethylene rural pipe

    • AS 2698.3-1990

      Plastics pipes and fittings for irrigation and rural applications - Mechanical joint fittings for use with polyethylene micro-irrigation pipes

    • AS 2698.3-1990 Rec:2017

      Plastics pipes and fittings for irrigation and rural applications - Part 3: Mechanical joint fittings for use with polyethylene micro-irrigation pipes

    • AS 2887-1993

      Plastic waste fittings

    • AS 2887-1993 Rec:2017

      Plastic waste fittings

    • AS 2888.0-2002

      Methods of testing plastics waste fittings - Introduction and list of methods

    • AS 2888.0-2002 REC:2017

      Methods of testing plastics waste fittings, Part 0: Introduction and list of methods

    • AS 2888.10-2002

      Methods of testing plastics waste fittings - Method for leak testing plastics pan connectors

    • AS 2888.10-2002 REC:2017

      Methods of testing plastics waste fittings, Method 10: Method for leak testing plastics pan connectors

    • AS 2888.11-2002

      Methods of testing plastics waste fittings - Method for cyclic testing of plastics telescopic waste connectors (rubber-ring joint type)

    • AS 2888.11-2002 REC:2017

      Methods of testing plastics waste fittings, Method 11: Method for cyclic testing of plastics telescopic waste connectors (rubber-ring joint type)

    • AS 2888.1-2002

      Methods of testing plastics waste fittings - Method of determining the suitability of connection threads of BSP form

    • AS 2888.1-2002 REC:2017

      Methods of testing plastics waste fittings, Method 1: Method of determining the suitability of connection threads of BSP form

    • AS 2888.2-2002

      Methods of testing plastics waste fittings - Method for determining dimensions

    • AS 2888.2-2002 REC:2017

      Methods of testing plastics waste fittings, Method 2: Method for determining dimensions

    • AS 2888.3-2002

      Methods of testing plastics waste fittings - Method for pressure testing of plastics waste fittings

    • AS 2888.3-2002 REC:2017

      Methods of testing plastics waste fittings, Method 3: Methods for pressure testing of plastics waste fittings

    • AS 2888.4-2002

      Methods of testing plastics waste fittings - Method for air pressure/vacuum testing of plastics waste fittings

    • AS 2888.4-2002 REC:2017

      Method of testing plastics waste fittings, Method 4: Method for air pressure/vacuum testing of plastics waste fittings

    • AS 2888.5-2002

      Methods of testing plastics waste fittings - Trap seal test

    • AS 2888.5-2002 REC:2017

      Methods of testing plastics waste fittings, Method 5: Trap seal test

    • AS 2888.6-2002

      Methods of testing plastics waste fittings - Method for load testing of plastics waste outlets

    • AS 2888.6-2002 REC:2017

      Methods of testing plastics waste fittings, Method 6: Method for load testing of plastics waste outlets

    • AS 2888.7-2002

      Methods of testing plastics waste fittings - Method for testing the seal of plastrics waste outlets

    • AS 2888.7-2002 REC:2017

      Methods of testing plastics waste fittings, Method 7: Method for testing the seal of plastics waste outlets

    • AS 2888.8-2002

      Methods of testing plastics waste fittings - Thermal cycling test

    • AS 2888.8-2002 REC:2017

      Methods of testing plastics waste fittings, Method 8: Thermal cycling test

    • AS 2888.9-2002

      Methods of testing plastics waste fittings - Method for determining residual stress in plastics waste fittings

    • AS 2888.9-2002 REC:2017

      Methods of testing plastics waste fittings, Method 9: Method for determining residual stress in plastics waste fittings

    • AS 4176.1-2010

      Multilayer pipes for pressure applications - Multilayer piping systems for hot and cold water plumbing applications - General

    • AS 4176.2-2010

      Multilayer pipes for pressure applications - Multilayer piping systems for hot and cold water plumbing applications - GeneralMultilayer piping systems for hot and cold water plumbing applications - Pipes

    • AS 4176.3-2010

      Multilayer pipes for pressure applications - Multilayer piping systems for hot and cold water plumbing applications - Fittings

    • AS 4176.5-2010

      Multilayer pipes for pressure applications - Multilayer piping systems for hot and cold water plumbing applications - Fitness for purpose of the system

    • AS 4176.7-2010

      Multilayer pipes for pressure applications - Multilayer piping systems for hot and cold water plumbing applications - Assessment of conformity

    • AS 4176.8-2010

      Multilayer pipes for pressure applications - Multilayer pipe systems for consumer gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Specifications for systems

    • AS 5082.1-2007

      Polybutylene (PB) plumbing pipe systems - Metric series - Metric polybutylene (PB) pipes for hot and cold water applications

    • AS 5082.1-2007 REC:2017

      Polybutylene (PB) plumbing pipe systems—Metric series, Part 1: Metric polybutylene (PB) pipes for hot and cold water applications

    • AS 5082.2-2007

      Polybutylene (PB) plumbing pipe systems - Metric series - Mechanical and fusion jointing systems

    • AS 5082.2-2007 REC:2017

      Polybutylene (PB) plumbing pipe systems—Metric series, Part 2: Mechanical and fusion jointing systems

    • AS ISO 9624-2008

      Polyethylene (PE) pipes for fluids under pressure - Mating dimensions of flange adapters and loose backing flanges (ISO 9624:1997, MOD)

    • AS/NZS 1462.1-2006

      Methods of test for plastics pipes and fittings - Method for determining the dimensions of pipes and fittings

    • AS/NZS 1462.25-2005

      Methods of test for plastics pipes and fittings - Determination of slow-crack-growth of PE (polyethylene) resins - Notched, constant ligament-stress (NCLS) method

    • AS/NZS 1462.25-2005 REC:2017

      Methods of test for plastics pipes and fittings - Determination of slow-crack-growth of PE (polyethylene) resins - Notched, constant ligament-stress (NCLS) method

    • AS/NZS 1462.26-2003

      Methods of test for plastics pipes and fittings - Determination of weathering resistance of plastics pipes for external storage

    • AS/NZS 1462.26-2003 AMDT 1

      Methods of test for plastics pipes and fittings - Determination of weathering resistance of plastics pipes for external storage

    • AS/NZS 1462.27-2003

      Methods of test for plastics pipes and fittings - Determination of toluene extract of carbon black

    • AS/NZS 1462.27-2003 REC:2017

      Methods of test for plastics pipes and fittings - Determination of toluene extract of carbon black

    • AS/NZS 1462.28-2003

      Method of test for plastics pipes and fittings - Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds

    • AS/NZS 1462.29-2006

      Methods of test for plastics pipes and fittings - Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2003, MOD)

    • AS/NZS 2033-2008

      Installation of polyethylene pipe systems

    • AS/NZS 2033-2008 AMDT 1

      Installation of polyethylene pipe systems

    • AS/NZS 2033-2008 AMDT 2

      Installation of polyethylene pipe systems

    • AS/NZS 2492-2007

      Cross-linked polyethylene (PE-X) pipes for pressure applications

    • AS/NZS 2537.1-2011

      Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - General (ISO 15875-1:2003, MOD)

    • AS/NZS 2537.2-2011

      Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Fittings (ISO 15875-3:2003, MOD)

    • AS/NZS 2537.2-2011 AMDT 1

      Mechanical jointing fittings for use with crosslinked polytheylene (PE-X) for pressure applications

    • AS/NZS 2537.3-2011

      Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Fitness for purpose of the system (ISO 15875-5:2003, MOD

    • AS/NZS 2537.4-2011

      Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Guidance for the assessment of conformity (ISO/TS 15875-

    • AS/NZS 2537.5-2011

      Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Fitting

    • AS/NZS 2642.1-2007

      Polybutylene (PB) plumbing pipe systems - Polybutylene (PB) pipe extrusion compounds

    • AS/NZS 2642.2-2008

      Polybutylene (PB) plumbing pipe systems - Polybutylene (PB) pipe for hot and cold water applications

    • AS/NZS 2642.3-2008

      Polybutylene (PB) plumbing pipe systems - Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications

    • AS/NZS 3707-2001

      Method for testing pressure cycling resistance of pipes and fittings

    • AS/NZS 3707-2001 REC:2017

      Method for testing pressure cycling resistance of pipes and fittings

    • AS/NZS 4129-2008

      Fittings for polyethylene (PE) pipes for pressure applications

    • AS/NZS 4129-2008 AMDT 1

      Fittings for polyethylene (PE) pipes for pressure applications

    • AS/NZS 4130-2009

      Polyethylene (PE) pipes for pressure applications

    • AS/NZS 4130-2009 AMDT 1

      Polyethylene (PE) pipes for pressure applications

    • AS/NZS 4131-2003 AMDT 1

      Polyethylene (PE) compounds for pressure pipes and fittings

    • AS/NZS 4131-2003 AMDT 1-2005

      Polyethylene (PE) compounds for pressure pipes and fittings

    • AS/NZS 4131-2010

      Polyethylene (PE) compounds for pressure pipes and fittings

    • AS/NZS 4131-2010 AMDT 1

      Polyethylene (PE) compounds for pressure pipes and fittings

    • AS/NZS 4401:2006 Rec:2017

      Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE)

    • AS/NZS 4401-2006

      Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE)

    • AS/NZS 4798(INT)-2005

      Polyethylene maintenance shafts

    • AS/NZS 5065:2005 Rec:2017

      Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications

    • AS/NZS 5065-2005

      Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications

    • AS/NZS 5065-2005 AMDT 1

      Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications

    • AS/NZS 7671:2010

      Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polypropylene (PP)

    • AS/NZS 7671:2010 Amd 2:2014

      Plastic piping systems for soil and waste discharge

    • AS/NZS 7671:2010 AMDT 1

      Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polypropylene (PP) (ISO 7671:2003, MOD)

  • The Sub Committees within the Technical Committee are listed here.

    Sub Committees