The committee's charter is defined in its Terms Of Reference [PDF].
Terms of Reference is subject to change

Active Projects0
Constitution0
International Relationships0
Published Standards0
Sub Committees0
Active Projects 0
Constitution 15
International Relationships 8
Published Standards 30
Sub Committees 0
  • This is a list of projects currently being worked on by Standards Australia's Standards Development Team.

    There are no active projects for this committee

  • The constitution of a Technical Committee consists of the Nominating Organisations that represent various interest groups across the industries. These Nominating Organisations are currently participating in Standards Australia’s Standards Development activity. The Nominating Organisation appoints a representative to represent the views of that organisation’s interest group during the development of a Standard.

    Constitution
     
  • Standards Australia participates in Standards development with the International standards bodies as listed below.

    For further information on ISO relationships please visit ISO’s website www.iso.org

    For further information on IEC relationships please visit IEC’s website www.iec.ch

    Organisation
    Title
    • ISO

      Plastics Pipes and Fittings for Soil, Waste and Drainage (Including Land Drainage)

    • ISO

      Plastics Pipes and Fittings for Water Supples

    • ISO

      Plastics pipes and fittings for inundustrial applications

    • ISO

      Plastics Pipes and Fittings for the Supply of Gaseous Fuels

    • ISO

      General Properties of Pipes, Fittings and Valves of Plastics Materials and their Accessories---Test Methods and Basic Specifications

    • ISO

      Valves and auxiliary equipment of plastics materials

    • ISO

      Rehabilitation of pipeline systems

    • ISO

      Plastics pipes, fittings and valves for the transport of fluids

  • Below is the list of current Standards developed and published by Standards Australia. This list does not display the obsolete, superseded, available superseded and withdrawn Standards. The published Standards are documents that set out specifications and procedures designed to ensure products, services and systems are safe, reliable and consistently perform the way they are intended to.

    Purchasing Standards

    To purchase a Standard, please contact our publishing partner SAI Global InfoStore.

    Designation
    Publication Title
    • AS 2200-2006

      Design charts for water supply and sewerage

    • AS 2200-2006 AMDT 1

      Design charts for water supply and sewerage

    • AS 2200-2006 REC:2017

      Design charts for water supply and sewerage

    • AS 2439.1-2007

      Perforated plastics drainage and effluent pipe and fittings - Perforated drainage pipe and associated fittings

    • AS 2439.2-2007

      Perforated plastics drainage and effluent pipe and fittings - Perforated effluent pipe and associated fittings for sewerage applications

    • AS 2943-2007

      Plastics pipes and fittings for gas reticulation - Polyamide compounds

    • AS 2944.1-2007

      Plastics pipes and fittings for gas reticulation - Polyamide pipes

    • AS 2944.2-2007

      Plastics pipes and fittings for gas reticulation - Polyamide fittings

    • AS ISO 6993.1-2007

      Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Pipes for a maximum operating pressure of 1 bar (100 kPa) (ISO 6993-1:2006, MOD)

    • AS ISO 6993.1-2007 REC:2017

      Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Pipes for a maximum operating pressure of 1 bar (100 kPa) (ISO 6993-1:2006, MOD)

    • AS ISO 6993.2-2007

      Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Fittings for a maximum operating pressure of 200 mbar (20 kPa)

    • AS ISO 6993.2-2007 REC:2017

      Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels, Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa)

    • AS ISO 6993.3-2007

      Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa)

    • AS ISO 6993.3-2007 REC:2017

      Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels, Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa)

    • AS/NZS 1254-2010

      PVC-U pipes and fittings for stormwater and surface water applications

    • AS/NZS 1254-2010 AMDT 1

      PVC-U pipes and fittings for stormwater and surface water application

    • AS/NZS 1254-2010 AMDT 2

      PVC-U pipes and fittings for stormwater and surface water applications

    • AS/NZS 1260:2017

      PVC-U pipes and fittings for drain, waste and vent applications

    • AS/NZS 1462.10-1998

      Methods of test for plastics pipes and fittings - Method for hydrostatic pressure testing of fittings and elastomeric seal joints for non-pressure applications

    • AS/NZS 1462.11-1996

      Methods of test for PVC pipes and fittings - Method for high temperature stress-relief testing of fittings

    • AS/NZS 1462.13-2006

      Methods of test for plastics pipes and fittings - Method for the determination of elastomeric seal joint contact width and pressure

    • AS/NZS 1462.14-1996

      Methods of test for PVC pipes and fittings - Method for determination of the light transmission of pipe

    • AS/NZS 1462.15-1996

      Methods of test for PVC pipes and fittings - Method for determination of vinyl chloride monomer content

    • AS/NZS 1462.16-2006

      Methods of test for plastics pipes and fittings - Method for high temperature testing of pipe

    • AS/NZS 1462.19-2006

      Methods of test for plastics pipes and fittings - C-ring test for fracture toughness of PVC pipes

    • AS/NZS 1462.20-1996

      Methods of test for PVC pipes and fittings - Method for the determination of long-term failure stress of PVC moulding compounds

    • AS/NZS 1462.21-1997

      Methods of test for plastics pipes and fittings - Method for determination of bond strength

    • AS/NZS 1462.2-2006

      Methods of test for plastics pipes and fittings - Method for determining the flattening properties of plastics pipes and fittings

    • AS/NZS 1462.22-1997

      Methods of test for plastics pipes and fittings - Method for the determination of pipe stiffness

    • AS/NZS 1462.23-2006

      Methods of test for plastics pipes and fittings - Method for determination of ring flexibility

    • AS/NZS 1462.3-1998

      Methods of test for plastics pipes and fittings - Method for determining the impact characteristics of pipes

    • AS/NZS 1462.4-2002

      Methods of test for plastics pipes and fittings - Method of determining reversion of UPVC pipes

    • AS/NZS 1462.5-2002

      Methods of testing plastics pipes and fittings - Vicat softening temperature

    • AS/NZS 1462.6-2008

      Methods of test for plastics pipes and fittings - Thermoplastics pipes, fittings and assemblies for the transport of fluids under pressure - Resistance to internal pressure

    • AS/NZS 1462.8-2008

      Methods of test for plastics pipes and fittings - Method of testing the leaktightness of assemblies

    • AS/NZS 1477:2017

      PVC pipes and fittings for pressure applications

    • AS/NZS 2032-2006

      Installation of PVC pipe systems

    • AS/NZS 2032-2006 AMDT 1

      Installation of PVC pipe systems

    • AS/NZS 3518-2004 AMDT 1

      Acrylonitrile butadiene styrene (ABS) compounds, pipes and fittings for pressure applications

    • AS/NZS 3518-2013

      Acrylonitrile butadine styrene (ABS) compounds, pipes and fittings for pressure applications

    • AS/NZS 3690-2009

      Installation of ABS pipe systems

    • AS/NZS 3879-2011

      Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings

    • AS/NZS 4441:2017

      Oriented PVC (PVC-O) pipes for pressure applications (ISO 16422:2014, MOD)

    • AS/NZS 4765:2017

      Modified PVC (PVC-M) pipes for pressure applications

    • AS/NZS 4999-2006

      PVC-U maintenance shafts

    • TR 5058-2009

      Temperature rerating of PVC pressure pipes operating at elevated temperatures

  • The Sub Committees within the Technical Committee are listed here.

    There are no sub committees for this committee