-
This is a list of projects currently being worked on by Standards Australia's Standards Development Team.
There are no active projects for this committee
-
The constitution of a Technical Committee consists of the Nominating Organisations that represent various interest groups across the industries. These Nominating Organisations are currently participating in Standards Australia’s Standards Development activity. The Nominating Organisation appoints a representative to represent the views of that organisation’s interest group during the development of a Standard.
-
Australian Chamber of Commerce and Industry
-
Australian Industry Group
-
Australian Pipelines and Gas Association Limited
-
Austroads
-
Bureau of Steel Manufacturers of Australia
-
Department of Defence (Australian Government)
-
Energy Networks Australia
-
National Association of Testing Authorities Australia
-
Rail Industry Safety and Standards Board
-
Weld Australia
-
Standards Australia participates in Standards development with the International standards bodies as listed below.
For further information on ISO relationships please visit ISO’s website www.iso.org
For further information on IEC relationships please visit IEC’s website www.iec.ch
There are no international relationships for this committee
-
Below is the list of current Standards developed and published by Standards Australia. This list does not display the obsolete, superseded, available superseded and withdrawn Standards. The published Standards are documents that set out specifications and procedures designed to ensure products, services and systems are safe, reliable and consistently perform the way they are intended to.
Purchasing Standards
To purchase a Standard, please contact our publishing partner SAI Global
InfoStore.
Designation
Publication Title
-
Methods for destructive testing of welds in metal - Corrosion test for welded austenitic stainless steel
-
AS 2205.10.1-2003 REC:2018
Methods for destructive testing of welds in metal, Part 10.1: Corrosion test for welded austenitic stainless steel
RECONFIRMATION OF AS 2205.10.1-2003 Methods for destructive testing of welds in metal, Part 10.1: Corrosion test for welded austenitic stainless steel
-
Method for destructive testing of welds in metal - General requirements for tests
-
Method for destructive testing of welds in metal, Part 1: General requirements for tests
RECONFIRMATION OF AS 2205.1-2003 Method for destructive testing of welds in metal, Part 1: General requirements for tests
-
Methods for destructive testing of welds in metal - Transverse butt tensile tests
-
AS 2205.2.1-2003 REC:2018
Methods for destructive testing of welds in metal, Part 2.1: Transverse butt tensile tests
RECONFIRMATION OF AS 2205.2.1-2003 Methods for destructive testing of welds in metal, Part 2.1: Transverse butt tensile tests
-
Methods for destructive testing of welds in metal - All-weld-metal tensile test
-
AS 2205.2.2-2003 REC:2018
Methods for destructive testing of welds in metal, Part 2.2: All-weld-metal tensile test
RECONFIRMATION OF AS 2205.2.2-2003 Methods for destructive testing of welds in metal, Part 2.2: All-weld-metal tensile test
-
Methods for destructive testing of welds in metal - Transverse joggle-butt tensile test
-
AS 2205.2.3-2003 REC:2018
Methods for destructive testing of welds in metal, Part 2.3: Transverse joggle-butt tensile test
RECONFIRMATION OF AS 2205.2.3-2003 Methods for destructive testing of welds in metal, Part 2.3: Transverse joggle-butt tensile test
-
Methods for destructive testing of welds in metal - Transverse guided bend test
-
AS 2205.3.1-2003 REC:2018
Methods for destructive testing of welds in metal, Part 3.1: Transverse guided bend test
RECONFIRMATION OF AS 2205.3.1-2003 Methods for destructive testing of welds in metal, Part 3.1: Transverse guided bend test
-
Methods for destructive testing of welds in metal - Transverse free bend test
-
AS 2205.3.2-2003 REC:2018
Methods for destructive testing of welds in metal, Part 3.2: Transverse free bend test
RECONFIRMATION OF AS 2205.3.2-2003 Methods for destructive testing of welds in metal, Part 3.2: Transverse free bend test
-
Methods for destructive testing of welds in metal - Longitudinal guided bend test
-
AS 2205.3.3-2003 REC:2018
Methods for destructive testing of welds in metal, Part 3.3: Longitudinal guided bend test
RECONFIRMATION OF AS 2205.3.3-2003 Methods for destructive testing of welds in metal, Part 3.3: Longitudinal guided bend test
-
Methods for destructive testing of welds in metal - Transverse joggle-butt wrap-around bend test
-
AS 2205.3.4-2003 REC:2018
Methods for destructive testing of welds in metal, Part 3.4: Transverse joggle-butt wrap-around bend test
RECONFIRMATION OF AS 2205.3.4-2003 Methods for destructive testing of welds in metal, Part 3.4: Transverse joggle-butt wrap-around bend test
-
Methods for destructive testing of welds in metal - Tongue bend test
-
AS 2205.3.5-2003 REC:2018
Methods for destructive testing of welds in metal, Part 3.5: Tongue bend test
RECONFIRMATION OF AS 2205.3.5-2003 Methods for destructive testing of welds in metal, Part 3.5: Tongue bend test
-
Methods for destructive testing of welds in metal - Nick-break test
-
AS 2205.4.1-2003 REC:2018
Methods for destructive testing of welds in metal, Part 4.1: Nick-break test
RECONFIRMATION OF AS 2205.4.1-2003 Methods for destructive testing of welds in metal, Part 4.1: Nick-break test
-
Methods for destructive testing of welds in metal - Fillet break test
-
AS 2205.4.2-2003 REC:2018
Methods for destructive testing of welds in metal, Part 4.2: Fillet break test
RECONFIRMATION OF AS 2205.4.2-2003 Methods for destructive testing of welds in metal, Part 4.2: Fillet break test
-
Methods for destructive testing of welds in metal - Macro metallographic test for cross-section examination
-
AS 2205.5.1-2003 REC:2018
Methods for destructive testing of welds in metal, Part 5.1: Macro metallographic test for cross-section examination
RECONFIRMATION OF AS 2205.5.1-2003 Methods for destructive testing of welds in metal, Part 5.1: Macro metallographic test for cross-section examination
-
Methods for destructive testing of welds in metal - Weld joint hardness test
-
AS 2205.6.1-2003 REC:2018
Methods for destructive testing of welds in metal, Part 6.1: Weld joint hardness test
RECONFIRMATION OF AS 2205.6.1-2003 Methods for destructive testing of welds in metal, Part 6.1: Weld joint hardness test
-
Methods for destructive testing of welds in metal - Charpy V-notch impact fracture toughness test
-
AS 2205.7.1-2003 REC:2018
Methods for destructive testing of welds in metal, Part 7.1: Charpy V-notch impact fracture toughness test
RECONFIRMATION OF AS 2205.7.1-2003 Methods for destructive testing of welds in metal, Part 7.1: Charpy V-notch impact fracture toughness test
-
Methods for destructive testing of welds in metal - Dropweight fracture toughness test for nil-ductility transition temperature
-
AS 2205.7.2-2003 REC:2018
Methods for destructive testing of welds in metal, Part 7.2: Dropweight fracture toughness test for nil-ductility transition temperature
RECONFIRMATION OF AS 2205.7.2-2003 Methods for destructive testing of welds in metal, Part 7.2: Dropweight fracture toughness test for nil-ductility transition temperature
-
Methods for destructive testing of welds in metal - Fracture mechanics toughness tests (K(sub)lc(/sub), critical CTOD and critical J values)
-
AS 2205.7.3-2003 REC:2018
Methods for destructive testing of welds in metal, Part 7.3: Fracture mechanics toughness tests (K(sub)lc(/sub), critical CTOD and critical J values)
RECONFIRMATION OF AS 2205.7.3-2003 Methods for destructive testing of welds in metal, Part 7.3: Fracture mechanics toughness tests (K(sub)lc(/sub), critical CTOD and critical J values)
-
Methods for destructive testing of welds in metal - Longitudinal fillet shear test
-
AS 2205.8.1-2003 REC:2018
Methods for destructive testing of welds in metal, Part 8.1: Longitudinal fillet shear test
RECONFIRMATION OF AS 2205.8.1-2003 Methods for destructive testing of welds in metal, Part 8.1: Longitudinal fillet shear test
-
Methods for destructive testing of welds in metal - Transverse fillet shear test
-
AS 2205.8.2-2003 REC:2018
Methods for destructive testing of welds in metal, Part 8.2: Transverse fillet shear test
RECONFIRMATION OF AS 2205.8.2-2003 Methods for destructive testing of welds in metal, Part 8.2: Transverse fillet shear test
-
Methods for destructive testing of welds in metal - Hot cracking test
-
AS 2205.9.1-2003 REC:2018
Methods for destructive testing of welds in metal, Part 9.1: Hot cracking test
RECONFIRMATION OF AS 2205.9.1-2003 Methods for destructive testing of welds in metal, Part 9.1: Hot cracking test
-
The Sub Committees within the Technical Committee are listed here.
There are no sub committees for this committee